CAUTION
Read all safety regulations and instructions. Any
errors made in following the safety regulations and
instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
2. Layout (Fig. 1)
1. Feet
2. Time switch (only CH 2000/1 TT)
3. Thermostat controller
4. Ventilator air outlet (only CH 2000/1 TT)
5. Ventilator switch (only CH 2000/1 TT)
6. Heat setting switch 1
7. Heat setting switch 2
8. Installation material
3. Items supplied
n Open the packaging and take out the equipment
with care.
n Remove the packaging material and any
packaging and/or transportation braces (if
available).
n Check to see if all items are supplied.
n Inspect the equipment and accessories for
transport damage.
n If possible, please keep the packaging until the
end of the guarantee period.
IMPORTANT
The equipment and packaging material are not
toys. Do not let children play with plastic bags,
foils or small parts. There is a danger of
swallowing or suffocating!
n Convector heater
n Feet (2x)
n Installation material
n Original operating instructions
4. Proper use
The equipment is designed for use as an additional
heater in dry, enclosed areas. Operate the equipment
only when it is completely assembled and standing
on the floor or hanging on the wall. It is prohibited to
operate the equipment on an unstable surface (e.g.
on a bed). Never mount the equipment on a wall
which is not capable of bearing the load or which is
combustible, on angled surfaces, or on the ceiling.
The equipment may only be used for the tasks it is
designed to handle. Any other use is deemed to be a
case of misuse. The user/operator and not the
manufacturer will be liable for any damage or injuries
caused as a result thereof.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.
5. Technical data:
Rated voltage: 230 V ~ 50/60 Hz
Output: 2000 W
Thermostat controller: Infinitely adjustable
Protection class: I
Equipment dimensions without feet approx.:
59 x 12 x 37.5 cm
6. Before starting the machine
CAUTION: To prevent a risk arising from the
unintentional resetting of the thermal cut out, never
connect the equipment to an external switching
device such as a timer switch or to an electric circuit
which is regularly switched on and off by a device.
6.1 Assembly
The equipment can be used indoors in a free
standing position or mounted on a wall. Maintain all
minimum distances. The equipment may only be
used when completely assembled and standing
vertically.
a) Free standing installation (Fig. 2)
Ensure that a minimum distance of 230 mm to the
sides and 650 mm to the top of the equipment are
maintained. Observe section 1 “Safety regulations“.
12
GB
