Bedienungsanleitung Einhell GE-CG 7.2 Li (Seite 16 von 56) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Schwedisch)

605963

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

- 16 -

Please note that our equipment has not been de-

signed for use in commercial, trade or industrial

applications. Our warranty will be voided if the

machine is used in commercial, trade or industrial

businesses or for equivalent purposes.

4. Technical data

Speed n

: ............................................. 1300 rpm

Cutting width of the grass cutter: .............. 85 mm

Cutting width of the shrub shears ........... 130 mm

Cutting thickness of the shrub shears ........ 8 mm

Running time max.: ...................................85 min

Battery pack: ............... Li-Ion / 7,2 V d. c. / 1.3 Ah

Charging time: ................................................ 2 h

sound pressure level: ...................... 61 dB (A)

sound power level: ......................... 81 dB (A)

K uncertainty ........................................... 6 dB (A)

Vibration a

: .......................................... 5.5 m/s

K uncertainty ............................................1,5 m/s

Weight: .......................................................1.1 kg

Sound pressure level

at the operator‘s ear .............................. 77 dB (A)

K uncertainty ........................................... 3 dB (A)

Battery charger

Mains voltage.....................100-240 V ~ 50-60 Hz

Output

Rated voltage ......................................... 9,2 V DC

Rated current: .......................................... 900 mA

•

The vibration emission level has been measu-

red in accordance with a set of standardized

criteria and can be used to compare one po-

wer tool with another.

•

The specified emission level can also be

used to make an initial assessment of the ex-

posure to vibrations.

•

The vibration emission level may vary from

the level specified during actual use, depen-

ding on the way in which the power tool is

used.

•

Try to keep the impact from vibrations as low

as possible. Exposure to vibrations can be re-

duced by wearing gloves when using the tool,

for example, and by limiting the amount of

operating time. This includes the full cycle of

operation (e.g. times when the power tool is

switched off and times when the tool is swit-

ched on but no working load is applied).

5. Before starting the equipment

5.1 Charging the battery pack (Figure 3, 4)

•

Connect the charger to the charging station

(Figure 3).

•

Check that your mains voltage is the same

as that marked on the rating plate of the bat-

tery charger. Plug the battery charger in a

socket-outlet. The red LED (Figure 4 / Item 1)

comes on to indicate that charging voltage is

available.

•

The battery pack is being charged. An empty

battery pack requires a maximum charging

period of 2 hours. The temperature of the bat-

tery pack may rise slightly during the charging

operation. This is normal.

•

As soon as battery pack is fully charged, the

red LED (Fig. 4/Item 1) extinguishes

If the rechargeable battery fails to charge, check

whether there is voltage at the socket outlet.

Timely recharging of the battery pack will help

it serve you well for a long time. Recharging is

always necessary when you notice a drop in the

tool’s performance.

Never allow the battery pack to become fully di-

scharged. This will cause it to develop a defect.

Important!

It is prohibited to remove or bridge any of the

switching elements installed on the tool by

the manufacturer (e.g. by securing a button

to the handle) as this would prevent the tool

from switching oﬀ automatically and result in

high risk of injury.

6. Operation

The area to be cut must ﬁ rst be cleared of stones

and other solid objects. The safety lock-oﬀ (Fig. 1/

Item 3) prevents the tool being started unintenti-

onally. Activate the safety lock-oﬀ (Figure 1 / Item

3) by pushing it forward and pressing the ON/

OFF switch (Figure 1 Item 4) at the same time. To

switch oﬀ the tool, let go of the ON/OFF switch

(Figure 1 / Item 4).

Anl_GE_CG_7_2_Li_SPK7.indb 16Anl_GE_CG_7_2_Li_SPK7.indb 16 09.07.15 09:5809.07.15 09:58

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Einhell GE-CG 7.2 Li Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info