Bedienungsanleitung Einhell GE-CM 18-30 Li (Seite 26 von 218) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

724332

Zoom out

Zoom in

Vorherige Seite

1/218

Nächste Seite

- 26 -

Tips for proper mowing

It is recommended that you overlap the mowing

swaths.

Only use a sharp blade that is in good condition.

This will prevent the grass blades from fraying

and the lawn from turning yellow.

Try to mow in straight lines for a nice, clean look.

The swaths should overlap each other by a few

centimeters in order to avoid stripes.

How frequently you should mow your lawn is

determined primarily by the speed at which the

grass grows. In the main growing season (May

- June) you will probably need to mow the lawn

twice a week, otherwise just once a week. The

cutting height should be between 4 - 6cm and the

amount of growth before mowing again should be

4 - 5cm. If the grass is allowed to grow somewhat

longer for whatever reason, do not make the mis-

take of cutting it back to the normal height in one

go. This will harm the lawn. Never cut it back by

more than half the height in one go.

Keep the underside of the mower housing clean

and remove grass build-up. Deposits not only

make it more diﬃ cult to start the mower; they

decrease the quality of the cut and make it harder

for the equipment to bag the grass.

Always mow along inclines (not up and down).

You can prevent the lawn mower from slipping

down by holding a position at an angle upwards.

Select the cutting height according to the length

of the grass. Make several passes so that no

more than 4cm of grass are cut at one time.

Switch oﬀ the motor before doing any checks on

the blade. Keep in mind that the blade continues

to rotate for a few seconds after the motor has

been switched oﬀ . Never attempt to manually

stop the blade. Regularly check to see if the

blade is securely attached, is in good condition

and is sharp. If the contrary is the case, sharpen

the blade or replace it. In the event that the blade

strikes an object, immediately switch oﬀ the lawn

mower and wait for the blade to come to a com-

plete stop. Then inspect the condition of the blade

and the blade mount. Replace any parts that are

damaged.

As soon as grass clippings start to trail the lawn

mower, it is time to empty the grass basket. Im-

portant! Before taking oﬀ the grass basket, switch

oﬀ the motor and wait until the blade has come to

a stop.

To take oﬀ the grass basket, use one hand to lift

up the chute ﬂ ap and the other to grab onto the

basket handle. Remove the basket. For safety

reasons, the chute ﬂ ap automatically falls down

after removing the grass basket and closes oﬀ the

rear chute opening. If any grass remains in the

opening, it will be easier to restart the engine if

you pull the mower back approximately 1m.

Do not use your hands or feet to remove clippings

in or on the mower housing, but instead use suita-

ble tools such as a brush or a hand broom.

In order to ensure that the majority of grass clip-

pings are picked up, the inside of the grass bas-

ket must be cleaned after each use.

Reattach the grass basket only when the motor is

switched oﬀ and the blade has stopped.

Lift up the chute ﬂ ap with one hand and, holding

the grass basket by its handle with the other

hand, hang in the basket from the top.

7. Cleaning, maintenance and

ordering of spare parts

Danger!

Pull the safety plug before carrying out any

cleaning work (Fig. 9).

7.1 Cleaning

•

Keep all safety devices, air vents and the

motor housing free of dirt and dust as far as

possible. Wipe the equipment with a clean

cloth or blow it with compressed air at low

pressure.

•

Do not clean the lawn mower with running

water, particularly with high-pressure water.

•

We recommend that you clean the device

immediately each time you have finished

using it.

•

Clean the equipment regularly with a moist

cloth and some soft soap. Do not use

cleaning agents or solvents; these could

attack the plastic parts of the equipment. En-

sure that no water can seep into the device.

Anl_GE_CM_18_30_Li_Solo_SPK9.indb 26Anl_GE_CM_18_30_Li_Solo_SPK9.indb 26 08.11.2017 08:44:1108.11.2017 08:44:11

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Einhell GE-CM 18-30 Li Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info