Bedienungsanleitung Einhell GE-EM 1233 (Seite 25 von 138) (Englisch, Dänisch, Schwedisch, Norwegisch)

605696

Zoom out

Zoom in

Vorherige Seite

1/138

Nächste Seite

- 25 -

Warning!

This equipment generates an electromagnetic

ﬁ eld during operation. Under certain circumstan-

ces this ﬁ eld may actively or passively impede

medical implants. To reduce the risk of serious

or fatal injuries, we recommend persons with

medical implants to consult their doctor and the

manufacturer of the medical implant prior to using

the equipment.

5. Before starting the equipment

Before you connect the equipment to the mains

supply make sure that the data on the rating plate

are identical to the mains data.

Always pull the power plug before making

adjustments to the equipment.

The lawn mower is delivered unassembled. The

complete push bar and the grass basket must be

assembled before using the lawn mower. Follow

the operating instructions step-by-step and use

the pictures provided as a visual guide to easily

assemble the equipment.

Fitting the push bar (Fig. 3a to 3d)

Take a bottom push bar (Fig. 2 /Item 3) and fasten

it with the nut (Fig. 2/Item 20) as shown in Fig. 3a.

Proceed in the same way on the other side.

When you ﬁ t the top push bar you can decide the

height of the push bar by selecting the appropri-

ate fastening hole (Fig. 3b). Fasten the top push

bar using either the holes L for a low position or H

for a high position. Screw the top push bar to the

bottom push bar as shown in Fig. 3c. Then attach

the power cable to the push bar (Fig. 3d/Item A)

using the cable clips (Fig. 2/Item 13).

Mounting the grass basket (Fig. 4a to 4d)

Plug the bottom and the top part of the grass box

together (Fig. 4a/Item 14, 15). Ensure that all the

plastic lugs engage correctly. Next push the grass

box handle (Fig. 4b/Item 16) into the openings on

the grass box. Check that the handle is secure

and correctly positioned.

Finally, press the insert (Fig. 2/Item 17) into the

grass basket as shown in Fig. 4c. Before you ﬁ t

the grass basket you must ensure that the motor

is switched oﬀ and the blade is not rotating. The

grass box must be attached to the two hooks on

the mower (Fig. 4d). To do this, open the ejector

ﬂ ap with one hand (Fig. 4d/Item 4) and attach the

grass box with the other hand. The ejector ﬂ ap is

held against the grass box by a spring.

Filling level indicator of the grass collector

The grass collector is equipped with a ﬁ lling level

indicator (Fig. 2/Item 18) which is opened by the

airﬂ ow that the lawn mower generates during ope-

ration. If the ﬂ ap closes during mowing, the grass

collecting device is full and must be emptied. To

ensure the proper functioning of the ﬁ lling level

indicator, the holes under the ﬂ ap must always be

kept clean and passable.

Using the mulching adapter (Fig. 5, not inclu-

ded with 34.001.92):

In mulching mode the cuttings are shredded in

the enclosed mower housing and then spread

back onto the lawn. It is not necessary to gather

and dispose of the grass.

Important: Mulching is only possible if the lawn is

relatively short.

Important!

Insert the mulching blade only when the engine is

switched oﬀ and the power plug has been pulled

out.

To use the mulching function, disconnect the

grass box, slide the mulching adaptor (Fig. 5/Item

19) into the ejector opening and close the ejector

ﬂ ap.

Adjusting the cutting height

Important!

Adjust the cutting height only when the motor is

switched oﬀ and the power cable has been dis-

connected.

Before you begin to mow, check to ensure that the

blade is not blunt and that none of the fasteners

are damaged. To prevent any imbalance, replace

blunt and/or damaged blades. To carry out this

check, ﬁ rst switch oﬀ the motor and pull out the

power plug.

The cutting height is adjusted as follows

(see Fig. 6):

1. Pull out the lever (6).

2. Set the lever (6) to the desired cutting height.

3. Release the lever (6) and check that it is se-

curely seated in the lock.

Anl_GE_EM_1233_M_SPK1.indb 25Anl_GE_EM_1233_M_SPK1.indb 25 09.09.13 18:0809.09.13 18:08

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Einhell GE-EM 1233 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Einhell GE-EM 1233

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info