Bedienungsanleitung Einhell GE-HH 18 Li T (Seite 21 von 112) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

605773

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

- 21 -

5. Before starting the equipment

Caution! Do not ﬁ t the battery until the equipment

has been fully assembled and all the settings

have been actuated. Always wear protective

gloves when working on the equipment to protect

yourself against injury. Carefully unpack all parts

and check that they are complete (Fig. 1).

5.1 General information on assembly

a) Fig. 2-3: Push the tube (7) onto the handle

housing (2a) as far as the bead (7a) and

screw it tight with the assembly nut (6).

b) Fig. 4: Hook the carabiner (A) of the shoulder

strap (8) into the strap attachment (B).

c) Fig. 4a: The additional handle consists of the

handle (N), the hexagon screw (P) and the

lock (F). It is ﬁ tted to the handle attachment

(U) as illustrated. Push the hexagon screw (P)

into the handle (N) and screw it tight to the

lock (F).

5.2 Adjusting the additional handle

(Fig. 5-6)

(a) Setting the tilt of the additional handle

Open (a) the lock (F). Set the desired tilt of the

additional handle (9). Close (b) the lock (F).

b) Shifting the additional handle

Open (a) the lock (H) and slide the additional

handle (9) into the required position. Close (b) the

lock (H).

5.3 Using the shoulder strap

Warning! Always use the shoulder strap when

working with the equipment. Switch oﬀ the equip-

ment before you take oﬀ the shoulder strap (risk

of injury).

1. Hook the carabiner (Fig. 4/Item A) into the

strap holder.

2. Slip the shoulder strap (Fig. 7/Item 8) over

your shoulder.

3. Adjust the length of the shoulder strap so that

the strap attachment is at waist level (Fig. 7).

4. The shoulder strap is equipped with a buckle.

Press the hooks together (Fig. 8) if you need

to put down the equipment quickly.

5. To change the strap position on the equip-

ment, press together the two metal loops (Fig.

4/Item L / M) and adjust the strap attachment

on the tube.

5.4 Adjusting the angle of the handle

(Fig. 9)

Press the two safety lock-oﬀ s (5) and adjust the

angle of the handle (2) to any of 4 latching posi-

tions.

5.5 Adjusting the angle of the motor housing

(Fig. 10)

Press the two safety lock-oﬀ s (14) and adjust the

angle of the motor housing (13a) to any of 7 lat-

ching positions.

5.6 Adjusting the telescopic tube (Fig. 11)

1. Undo the telescopic tube lock nuts (10 + 12)

by turning them counter-clockwise.

2. Pull out the telescopic tubes (11 + 13) to suit

the required working height.

3. Secure the telescopic tube lock nuts (10 +

12) by them turning clockwise.

5.7 Fitting the hedge trimmer mounting kit to

the motor head (Fig. 12 – 13)

The guard must be slipped over the hedge cutter

blade in order to prevent injuries.

1. Position the hedge trimmer mounting kit and

the motor head such that the arrows on both

parts coincide.

2. Press the hedge trimmer mounting kit against

the motor head. This will cause the lock

button (R) to be pushed to the right. Turn the

hedge trimmer mounting kit clockwise. The

hedge trimmer mounting kit will lock onto the

motor head and is then secured in place. This

will cause the lock button (R) to be pushed to

the left.

5.8 Removing the hedge trimmer mounting

kit from the motor head (Fig. 12 – 13)

The guard must be slipped over the hedge cutter

blade in order to prevent injuries.

1. Pull the lock button (R) to the right.

2. Turn the hedge trimmer mounting kit to the

point where the arrows on the motor head

and hedge trimmer mounting kit coincide,

allowing the mounting kit to be removed.

5.9 Fitting the battery (Fig. 14 - 15)

Press the side pushlock button (T) of the battery

pack as shown in Fig. 14 and push the battery

pack into the mount provided. When the battery

pack is positioned as in Fig. 15, make sure that

the pushlock button latches in place! To remove

the battery pack, proceed in reverse order.

Anl_GE_HH_18_Li_T_SPK7.indb 21Anl_GE_HH_18_Li_T_SPK7.indb 21 13.08.14 08:4913.08.14 08:49

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Einhell GE-HH 18 Li T Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info