Bedienungsanleitung Einhell MK 2600E (Seite 22 von 88) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

724141

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

- 22 -

5. Operation

5.1 Description of the control elements (Fig.

1. “MODE” switch – function

2. Unassigned

3. “TIMER” LED – timer on

4. “TIMER” switch

5. “UP” selector switch – higher

6. “ON/OFF” switch – On/Off

7. “DOWN” selector switch – lower

8. „Sleep“ switch - sleep function

9. „Sleep function set“ LED

10. “SPEED” switch – fan speed

11. „Fan fast“ LED

12. Remote control sensor

13. „Fan slow“ LED

14. “COMP” LED – compressor running

15. LED – indicator panel

16. “F.W.” LED – condensate tray full

17. „Fan function set“ LED

18. „Automatic mode set“ LED

19. „Cool mode set“ LED

5.2 Switching the device on and off

Press the On/Off switch. The device starts up

automatically. If the ambient temperature:

•

is higher than 23°C the device will run in coo-

ling mode;

•

if it is between 20°C and 23°C the device will

run in fan mode.

The status of the device, or mode in which it is

running, will be shown by the corresponding

LEDs (see indicator panel).

Note: The LED indicator panel shows the current

room temperature (0-50°C).

To switch the device off, press the On/Off switch

again.

Important.

After you have switched off the unit, you must

wait at least three minutes before you switch

it on again. This protects the compressor from

overloads and considerably extends its service

life.

The cooling system switches itself off whenever

the room temperature is below the value set on

the thermostat. The air circulation/ventilation fan

continues to run as set. If the room temperature

increases again, the cooling system switches on

again.

5.3 Selecting the mode

Press the “Mode” selector (MODE) in the

sequence “Automatic”, “Cool”, “Fan”. The LED for

the selected mode lights up (see indicator panel).

5.4 Setting the set-point temperature

Press the “Warmer” selector (UP) or “Cooler”

(DOWN) to set your desired set-point

temperature. If you press the “Warmer” or

“Cooler” selector, the LED indicator panel

will show your desired set-point temperature.

Otherwise the LED indicator panel always shows

the current room temperature.

5.5 Selecting the fan speed

Press the “Fan speed” selector to set the desired

fan speed.

The LED for the mode lights up (see indicator

panel).

If the device is in “Automatic mode” (AUTO) the

fan speed will be selected automatically by the

device in dependency on the room temperature.

The corresponding LED lights up. The “Fan

speed” is deactivated.

5.6 Setting the timer

Press the switch for the “Timer” (TIMER) to

set the desired operating time (1 - 12 h). The

“Timer” (TIMER) LED lights up. If the timer is

set, the device starts automatically. If you press

the “Timer” switch, the time you have set will be

shown in the LED indicator panel. If the timer

has not been switched on, the device will run

continuously.

If the unit is connected to the voltage supply and

you press the TIMER switch, you can set the time

at which you wish the unit to be switched on. If,

for example, the timer shows “2”, this means that

the device will start up automatically in 2 hours

time.

5.7 Activating the sleep function (only

possible in cooling mode)

Press the “Sleep” key to activate the sleep

function. In order to prevent undercooling, the

set room temperature increases 1 °C during the

first hour and 2 °C within 2 hours. When the sleep

function is switched off the room temperature

decreases back to the set value. After the sleep

function has been on for 12 hours the equipment

switches off automatically.

Anleitung_MK_2100_E_SPK7.indb 22Anleitung_MK_2100_E_SPK7.indb 22 25.09.2018 10:12:4125.09.2018 10:12:41

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Einhell MK 2600E Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info