their safety or they have received instructions from
such a person in how to use the equipment safely.
Children must always be supervised in order to
ensure that they do not play with the equipment.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
2. Layout (Fig. 1)
1 Heating ribs
2 Recessed grip
3 Operating display
4 Heat setting switch
5 Thermostat control
6 Cable store
7 Castors
3. Proper use
The equipment is designed exclusively for use as an
additional heater in dry, closed rooms. It is designed
to be operated only when placed on the floor.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data:
MR 920/1
Rated voltage: 220-240 V ~ 50 Hz
Output: 2000 W (800 W / 1200 W)
Thermostat control: Infinitely adjustable
Heating ribs: 9
Protection class: I
MR 1125/1
Rated voltage: 220-240 V ~ 50 Hz
Output: 2500 W (1000 W / 1500 W)
Thermostat control: Infinitely adjustable
Heating ribs: 11
Protection class: I
5. Assembly
5.1 Fitting the castors (Fig. 2 – 3)
Important! To prevent damage, place the radiator
upside down on a soft surface (for example a
carpet).
Slide the fastening bar (a) under the radiator
element and secure the castors carrier with the
wing nuts (b). Repeat the above on the last space
between the ribs.
6. Starting up
Important! Before using the appliance for the first
time, check that the voltage supply is the same as
the voltage details set out on the data plate.
Read safety instructions listed under section 1.
If the equipment should topple or fall over, the power
supply will be cut off by a safety switch integrated in
the equipment. The power supply resumes as soon
as the equipment is stood upright again.
6.1 Function switch (Fig. 4 / Item 4):
Low heat output – Switch in position "I"
Medium heat output – Switch in position "II"
High heat output – Switch in position "III"
The possible output levels are listed in the technical
data in point 4.
6.2 Thermostat control/Room thermostat
(Fig. 4 / Item 5):
Note: When the equipment is moved to a new
location, the thermostat will not work properly until
the equipment has adopted the ambient temperature.
Switch on the required output using the two function
switches. Turn the control to “MAX” until the required
room temperature has been reached. Then turn
down the control until you hear a clear click. The
thermostat control will switch the radiator on and off
8
GB
