immediately.
To avoid electromagnetic interference the device
should be kept away from televisions and radios.
Packaging:
The unit is supplied in packaging to prevent it from
being damaged in transit. Retain the packaging for
later storage (e.g. in winter) of the device. If you
should nevertheless wish to dispose of the
packaging, remember that it is raw material and
can therefore be reused or can be returned to the
raw material system.
Before using
1. Always place the portable device on a firm,
horizontal footing.
2. The machine must always be in an upright
position.
3. Never tilt the device by more than 45°!
Whenever the device has been transported
(inclined positions), leave for at least one hour
before connecting to a socket outlet.
4. Connect the device to the correct socket outlet
(check the mains supply voltage).
5. In the cooling function the warm exhaust air must
be transferred outside by the exhaust air hose.
An opening in the wall or window must therefore
be provided.
2. Technical data
Coolant: R410A
Coolant quantity 780 g
Cooling capacity* 3700 W
Mains voltage 230 V ~ 50 Hz
power rating* 1418 W
Energy efficiency class* A (EER 2.61)
Max. air throughput 500 cbm/h
Max. room size 95 m3
Max. dehumidifier output (30°C/80%RH) 53 l/day
Fan speed levels 3
Area of application: “Room temperature” 18-32°C
Sound pressure level ≤ 54 dB(A)
Dimensions (WxDxH) 762 x 356 x 534 cm
Net weight 37 kg
* data according to EN 14511
3. Proper use
The air-conditioning system is only designed to air-
condition dry rooms with a maximum room volume of
95 m3. The room volume depends on the local
conditions. Large window areas, additional heat
sources (PC, television, people, etc.), poor wall
insulation, etc. serve to reduce this room volume.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Layout
Front (Fig. 1)
1 Air outlet grille
2 Control device
3 Handle
4 Castors
Back (Fig. 2)
5 Air inlet filter
6 Air inlet
7 Opening for connection fittings for the exhaust air
hose
8 Mains cable wraparound brackets
9 Rubber bung for condensation water drain (in the
device)
Accessories (Fig. 3)
11 Exhaust air connection fittings
12 Bushing ring
13 Exhaust air hose
14 Foam material (Used for exhaust air outlet
through the window.)
15 Foam material (Used for exhaust air outlet
through the open window and placed in the open
section of the window. As far as possible, no
additional warm air should come into the room
from outside.)
16 Cap for the hole in the window/wall
18 Drainage water hose
19 Activated carbon filter
Remote control
12
GB
