22
Important installation instructions
Over 8 cm Over 15 cm, if the tube
connection is from the left or the
back.
over 20 cm
over 20 cm
over 300 cm
over 2 m
over50 cm
over 30 cm
o
ve
r 3
0
cm
over 50 cm
over 200 cm
Selecting the place to install the indoor device
The air flow must never be blocked.
The cooled air should be capable of being
distributed to all parts of the room.
The maximum distance between the indoor and
outdoor device is 15m and their maximum
difference in height 5m.
Mount on a solid wall to prevent vibrations.
Avoid direct sunlight.
Take into account a slight condensate run-off.
Selecting the place to install the outdoor device
The device must not be exposed to strong gusts of
wind.
Make sure that the device is well ventilated and
kept free of dust. Avoid direct exposure to rain and
sunlight.
Make sure that the operational noises and air
emissions do not cause a nuisance for neighbours.
Install on a firm base, avoiding excessive noise or
vibrations.
Avoid locations where combustible gas or leakage
can be emitted.
Fix the device’s installation feet with care if the
device is to be installed well above them.
Important
Do not hesitate to contact our service partners.
They will be able to give you a speedy response to
all your questions so that your system can be
installed correctly. We shall accept no liability for
services if the air conditioner is not installed, vented
and put into operation for the first time by an air
conditioning specialist.
Mounting accessories
Mounting plate
Screws 4x25 mm
Batteries 2 x MICRO LR03 1.5V
Remote control
Tubing accessories
Tube connector
Composite wrap-around tape
Klamb
Drainage hose
Wall hole cap
Connection cable
