GB
13
3. Pressing the ON/OFF button enables you to
switch on the air conditioner. OPERATION and
AUTO will be lit on the display of the indoor
device. In addition the temperature set on the
remote control will be displayed. The fan speed
will be set automatically.
4. Pressing the ON/OFF button a second time
enables you to switch off the air conditioner.
NOTE
In AUTO mode the air conditioner will automatically
select on the COOL, FAN and HEAT modes by
detecting the temperature difference between the
actual room temperature and set temperature.
B) COOL, HEAT and FAN modes
1. You can select the required COOL, HEAT or
FAN mode by pressing the MODE button.
2. Pressing the TEMP buttons enables you to
select the required room temperature.
3. Pressing the FAN SPEED button enables you to
select the fan speed. Each time you press the
button, the speeds will be selected in the
following sequence: AUTO – LOW – MED –
HIGH.
4. Pressing the ON/OFF button enables you to
switch on the air conditioner. OPERATION will
be lit on the display of the indoor device. In
addition the temperature set on the remote
control will be displayed.
5. Pressing the ON/OFF button a second time
enables you to switch off the air conditioner.
NOTE
FAN mode cannot be used to control the
temperature. Only settings 1, 3, 4 and 5 can be
made in this mode.
C) DRY (dehumidifier) mode
1. Press the MODE button to select DRY mode.
2. Pressing the TEMP buttons enables you to
select the required room temperature. The
device will alternately activate the fan function
and the cooling function.
3. Pressing the ON/OFF button enables you to
switch on the air conditioner. AUTO will be lit on
the display of the indoor device. In addition the
temperature set on the remote control will be
displayed. The air conditioner runs at low fan
speed in DRY mode.
4. Pressing the ON/OFF button a second time
enables you to switch off this mode.
D) TIMER mode
Press the TIMER ON button to set the automatic
activation time for the device and the TIMER OFF
button to set the automatic deactivation time for the
device.
Setting the activation (deactivation) time
1. Press the TIMER ON (TIMER OFF) button. The
remote control display will now show TIMER ON
(TIMER OFF), the last time set for the starting
(stopping) the deviceʼs operation and the “h”
symbol. Now set the time when you want the
device to start (stop).
2. Each time you press TIMER ON (TIMER OFF),
you will put the activation (deactivation) time 0.5
hours back (when you reach 10 hours, the
interval will be one hour).
3. After a few seconds the TIMER control light will
be permanently lit on the indoor device.
NOTES
1. If you have selected an activation and a
deactivation time, TIMER ON/OFF will be shown
on the display.
2. To change the TIMER ON/OFF time, press the
appropriate TIMER button and reset the time.
3. To delete the TIMER ON/OFF setting, set the
TIMER time to 0:00.
E) SLEEP (economy) mode
1. Press the SLEEP button on the remote control
during cool, heat or auto mode.
2. The air conditioning system will automatically
increase (cool mode) or lower (heat mode) the
set temperature by 1°C after one hour.
3. After a further hour this process will be repeated
automatically.
4. This mode allows you to save energy whilst
maintaining a pleasant temperature.
9. Indoor device settings
Remote control fails to work (emergency
operation) (Fig. 5)
If the remote control fails to work (empty batteries or
malfunction), use the emergency switch (Auto/Cool).
a) Open the front panel and lift it until the panel
audibly clicks into position in an open position.
b) Press the button until the AUTO display is lit. The
device is now operating in forced automatic mode
(the default temperature is 24°C)
c) Close the front panel again.
Caution
1. If you press the button repeatedly, the operating
mode will change in the following sequence:
AUTO, COOL, OFF.
2. If you press the button twice, the device will be
set to forced cool mode. This mode is only
