decrease the set temperature by 1°C.
The temperature can be set from 16°C to 30°C on
the remote control via the “Cooling”, “Dehumidifying”
and “Heating” operating modes.
The temperature cannot be set in the “Automatic”
and “Fan” modes.
4 “Fan” (fan speed) key
The fan speed changes in the following sequence
per key press:
Automatic -> Slow -> Medium -> Fast
5 “ON-OFF” (device ON/OFF) key
This key is pressed to switch the device on and off.
6 LCD display
All settings are displayed.
7 “Sleep” (sleep function) key
Press this key once to activate the sleep function.
Press the key twice to switch the function back off.
8 “T-ON” (device ON timer) key
Press this key to automatically switch on the device
within a 0.5 and 24 hour range.
9 “T-OFF” (device OFF timer) key
Press this key to automatically switch off the device
within a 0.5 and 24 hour range.
Note:
The “AIR” and “LIGHT” keys are not assigned and do
not influence the device when pressed.
Operating modes
A) Cooling mode (Fig. 7)
1. Press the “ON/OFF” key to switch on the device.
2. Press the “MODE” key until the “Cooling” mode
icon appears in the display.
3. Press the “Swing” key. The air flow is adjusted
upwards/downwards. Press the key twice to lock
the slats in their current position.
4. Press the “FAN” key to select the fan speed:
Automatic -> Slow -> Medium -> Fast
5. Press the “+°C” or “-°C” key to set the desired
temperature.
Notes!
앬 The cooling mode will only work if the room
temperature set is lower than the current room
temperature. When the set room temperature is
reached, the outdoor compressor stops. The
centrifugal fan of the indoor device circulates the
air in the room.
앬 The set room temperature should not be more
than 5°C below the outdoor temperature
(example: outdoor temperature 30°C, ideal room
temperature 25°C).
앬 The room temperature can be set between 16°C
and 30°C with the remote control.
앬 The higher the outdoor temperature, the higher
the attainable indoor temperature
B) Heating mode (Abb. 8)
1. Press the “ON/OFF” key to switch on the device.
2. Press the “MODE” key until the “Heating” mode
icon appears in the display.
3. Press the “Swing” key. The air flow is adjusted
upwards/downwards. Press the key
twice to lock the slats in their current position.
4. Press the “FAN” key to select the fan speed:
Automatic -> Slow -> Medium -> Fast
5. Press the “+°C” or “-°C” key to set the desired
temperature.
Notes!
앬 The heating mode will only work if the room
temperature set is higher than the current room
temperature. When the set room temperature is
reached, the outdoor compressor stops. The
centrifugal fan of the indoor device circulates the
air in the room.
앬 The room temperature can be set between 16°C
and 30°C with the remote control.
앬 The attainable room temperature is a factor of
local conditions and the outdoor temperature.
The cooler the outdoor temperature, the lower
the attainable room temperature.
C) Dehumidifying mode (Abb. 9)
1. Press the “ON/OFF” key to switch on the device.
2. Press the “MODE” key until the “Dehumidifying”
mode icon appears in the display.
3. Press the “Swing” key. The air flow is adjusted
upwards/downwards. Press the key
twice to lock the slats in their current position.
4. Press the “+°C” or “-°C” key to set the desired
temperature.
Notes!
앬 The “Dehumidifying” mode only works if the
difference between the set room temperature
and the current room temperature is within
+/- 2°C.
앬 If the room temperature set for the
“Dehumidifying” mode is more than 2°C higher
than the current room temperature, the
compressor stops along with the fan in the
outdoor device. The centrifugal fan of the indoor
device is also switched off.
13
GB
