Bedienungsanleitung Einhell TC-HP 1334 (Seite 19 von 156) (Alle Sprachen)

606016

Zoom out

Zoom in

Vorherige Seite

1/156

Nächste Seite

- 19 -

6. Operation

The equipment consists of an assembly with a

pump, which is encased in a shock absorbing

housing. For an optimal working position the

equipment comes with a lance and a non-slip

gun, whose shape and conﬁ guration comply with

the applicable regulations.

6.1 Using for the ﬁ rst time

Once you have completely assembled the pres-

sure cleaner and made all the connections, pro-

ceed as follows:

Open the water inlet. Press safety pin „a“ (Fig. 2)

on the spray gun and pull back trigger lever „b“

(Fig. 2) in order to bleed the trapped air out of the

equipment.

Turn on the equipment by switching the On/Oﬀ

switch (Fig. 1/3) to “I”.

Now activate the trigger lever (b).

Pressure switch:

Function of the pressure switch: The following

happens when the gun is switched oﬀ : the pres-

sure switch trips, the power supply is disconnec-

ted, the pressure switch switches oﬀ the pump,

and the high-pressure cleaner goes into stand-by.

As soon as you press the trigger lever (b), the

pump will restart. To turn oﬀ the pressure cleaner

completely, set the On/Oﬀ switch (Fig. 1/3) to

“OFF”. When the pump pressure exceeds the

pressure of the pre-set pump valve, the surplus

liquid will return to the inlet system.

6.2 Using cleaning agent

•

Fill the cleaning agent container (10) with sui-

table cleaning agent.

•

The cleaning agent will be added automati-

cally in low-pressure mode.

Note:

Use only cleaning agents which are expressly

suitable for high-pressure cleaners.

6.3 Holder for the gun/accessories (Fig. 1)

The gun and accessories can be kept in the provi-

ded accessories holder (2) in order to save space

when not in use.

7. Replacing the power cable

Danger!

If the power cable for this equipment is damaged,

it must be replaced by the manufacturer or its

after-sales service or similarly trained personnel

to avoid danger.

8. Cleaning, maintenance and

ordering of spare parts

Danger!

Always pull out the mains power plug before star-

ting any cleaning work.

8.1 Cleaning

•

Keep all safety devices, air vents and the

motor housing free of dirt and dust as far as

possible. Wipe the equipment with a clean

cloth or blow it with compressed air at low

pressure.

•

We recommend that you clean the device

immediately each time you have finished

using it.

•

Clean the equipment regularly with a moist

cloth and some soft soap. Do not use

cleaning agents or solvents; these could

attack the plastic parts of the equipment. En-

sure that no water can seep into the device.

8.2 Maintenance

8.2.1 Testing the water intake ﬁ lter

Periodically check the intake ﬁ lter in order to pre-

vent clogging, which could jeopardize operation

of the pump.

To do this, unscrew the coupling for the water inlet

hose from the device and clean the exposed inlet

sieve under running water.

Anl_TC_HP_1334_SPK7.indb 19Anl_TC_HP_1334_SPK7.indb 19 26.02.16 08:3426.02.16 08:34

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Einhell TC-HP 1334 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Einhell TC-HP 1334

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info