32
Chapter 3 Troubleshooting
(HDMI Input Signal)
Problems Possible cause and remedy
1. No Picture
• Power indicator does not light up.
• Check whether the power cord is correctly connected.
• Press
on the remote control or touch
of the
operation switch.
• Power indicator lights in orange.
• Switch the input signal with [INPUT SELECT]
( ) on
the remote control or of the operation switch.
• Turn on the AV equipment.
• Power indicator lights in blue. • Check whether the AV equipment is properly connected
to the monitor.
• Switch the setting using the <Field Rate> in the <Monitor
Settings>.
2. The message below appears. These messages appear when the input signal is incorrect
even if the monitor is functioning.
• The frequency of the signal is outside the specication.
Example:
• Conrm the digital signal format by referring to the
instruction manual of the equipment connected. (Refer to
page 35.)
3. The color shown on the display is not correct. • Change the color space of the video input signal using
<Color Space> in the <Monitor Settings> menu.
(Normally, select “Auto”.)
4. The video images are out of control by the FF/REW
operation when a video equipment is connected to
the monitor.
• The monitor mechanism causes the image out of control
status a little. This is not a malfunction.
5.
No sound/Volume control is not available. • Check whether the applicable format of the equipment
connected is correct.
Refer to page 35 for the sound input format of the
monitor.
