Bedienungsanleitung Elac SUB 2060D (Seite 34 von 48) (Deutsch, Englisch)

561007

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Description and use of the control panel

Page 30

7 EQ 1 Equalizer

The EQ1 is an equalizer that allows both amplification/attenuation, as well as the

frequency to be set. This enables a wide variety of applciations and makes the

EQ1 very flexible.

This filter enables you to compensate for acoustic peculiarities of the room.

On the one hand, room resonance that, for example, produces a peak at a discrete frequency (humming or a

booming bass) can be suppressed. With the aid of two parameters ("EQ 1 Frequency" and "EQ 1 Level") the fre-

quency of the room resonance and the attenuation in dB are set. For an ideal equalization a CD with test signals –

especially with sinus ones in the base range – is useful. Preferably, you should use the ELAC Cara test CD for this.

The presetting of the filter should be: “EQ 1 Frequency” to 120Hz, “EQ 1 Level” to minimum attenuation, i.e. 0dB.

Sinus tones will now be played from the CD, starting with the highest frequency. The CD contains several sequen-

tial tracks, on which sinus tones with ever lower frequencies are archived, down to 20 Hz. A frequency that sounds

unnaturally loud represents the room resonance. Now find the frequency corresponding to the track in the CD

booklet and set “EQ 1 Frequency” to this value. The attenuation should be experimentally determined, starting from

the strongest attenuation, step by step back to the minimum, until the attenuation frequency produces the same

apparent loudness in the room as all the other frequencies.

Important:

If you are the owner of a SUB 2080 D, then the EQ 2 (room resonance filter) described below is available for han-

dling peaks in the frequency range. This should be used as the first resort.

If, when listening to the test CD, another frequency that produces a peak is noticeable, this can be eliminated with

the EQ1.

On the other hand, frequency ranges can also be specifically reinforced with the EQ1. If, for example, when equal-

izing with the test CD or listening tests, you notice a frequency that is unnaturally quiet, then reinforce this with the

EQ 1. If you have used a test CD, then set the “EQ 1 Frequency” to the measured frequency. The attenuation

should be experimentally determined, starting from the neutral setting (“EQ 1 Level” to 0dB), increased step by

step to the maximum reinforcement, until the attenuated frequency produces the same apparent loudness in the

room as all the other frequencies.

The EQ1 offers the option, besides equalizing room effects, of adjusting the tonality of the subwoofer to your per-

sonal preferences. Thus desired frequency ranges can be emphasized or reduced.

To set the mean frequency of the filter, go to the rotation menu with one of the outer arrow keys to select “EQ 1

Frequency”. By pressing the selector key in the middle, you arrive at frequency selection. Now select the required

crossover frequency with one of the outer arrow keys and return to the rotation menu by pressing the selector key.

Your selected frequency will now be shown.

To set the attenuation of the filter, go to the rotation menu with one of the outer arrow keys to select “EQ 1 Level”.

By pressing the selector key in the middle, you arrive at the attenuation selection. Now select the required attenua-

tion with one of the outer arrow keys, and return to the rotation menu by pressing the selector key. Your selected

attenuation will now be shown.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elac SUB 2060D Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info