Bedienungsanleitung Electrolux ASB 8000 (Seite 31 von 140) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

77853

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

used incorrectly, no liability can be

accepted for any damage that may

be caused.

Child Safety

• Do not leave the appliance running

while unattended, or let children

near the appliance unsupervised!

• Children should be supervised to

ensure that they do not play with

the appliance.

• Packaging material, e.g. plastic

bags, should not be accessible to

children.

When operating the

appliance

• Always place the unit on a flat,

level surface.

• Never operate the appliance with

wet hands.

• Ensure the Speed Selector is in the

off position before plugging into

the power outlet.

• Plastic parts should never be dried

at or near direct sources of heat.

• The appliance must not be used

for mixing dyes (paints, or lacquer,

etc,). This can cause explosions!

• When you have finished using the

appliance, before cleaning, switch

off and pull the plug out of the

socket.

• The blade assembly should only

be disassembled by an authorised

technician.

• Never clean the motor casing

under running water or soapy

water.

• Caution! The blade assembly is

very sharp. Be careful when taking

the blender apart and re-assembling. It

may cause injury if handled

incorrectly.

• Do not leave hard objects (for

example spoons) in the blade

assembly while running, and do

not grasp the appliance with the

hand inside the blender tank. This

may cause injury!

Possible applications

The blender can be used for mix-

ing a wide variety of drinks, crush-

ing ice, reducing fruit and

vegetables, whipping cream, etc.

Cord storage

The appliance is fitted with a cord

storage facility at the bottom. If the

connection cord to the power out-

let is too long, it can be wraped

around the cord storage until it is

the required length.

Disassembling the Appliance

0 Take the plug out of the socket.

0 Remove the lid (Fig. 1/B).

0 Remove the blender tank

(Fig. 1/C).

0 Turn the blender blender tank

upside down.

0 Turn the blade assembly counter-

clockwise using the filler cup

(Fig. 1/A) as tool and remove

(Fig. 3). The grooves of the filler

cup fit the ribs of the blade assem-

bly.

0 You can now remove the rubber

seal (Fig. 4).

Caution! The blade assembly is

very sharp. It can cause injury if

handled incorrectly! The rubber

seal can easily be irreparably

damaged by the blade assembly.

Caution! Do not use force when

taking the blade assembly out of

the blender, as this might cause

damage. If necessary, tilt it slightly

when removing.

Do not attempt to remove the

stainless steel blades from the

blade assembly.

Assembling the Blender

0 Place the rubber seal on the blade

assembly.

822 949 412_ASB8000.book Seite 31 Donnerstag, 29. Mai 2008 8:18 08

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Electrolux ASB 8000 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info