Bedienungsanleitung Electrolux ehg6833x (Seite 21 von 48) (Deutsch, Englisch, Holländisch, Französisch)

332330

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

CARE AND CLEANING

Warning! Switch the appliance off and

let it cool down before you clean it.

Disconnect the appliance from the

electrical supply, before carrying out

any cleaning or maintenance work.

Warning! For safety reasons, do not

clean the appliance with steam

cleaners or high-pressure cleaners.

Warning! Do not use abrasive

cleaners, steel wool pads or acids, they

can cause damage to the appliance.

• You can remove the pan supports to

easily clean the hob.

• To clean the enamelled parts, cap and

crown, wash it with warm soapy water.

• Stainless steel parts wash with water,

and then dry with a soft cloth.

• The pan supports are not dishwasher

proof; they must be washed by hand.

• When you wash the pan supports by

hand, take care when you dry them as

the enamelling process occasionally

leaves rough edges. If necessary, remove

stubborn stains using a paste cleaner.

• Make sure you position the pan supports

correctly after cleaning.

• To make burners work correctly, make

sure that the arms of the pan supports

are in the centre of the burner.

•

Be very careful when you replace the

pan supports to prevent the hob top

from damage.

After cleaning, dry the appliance with a soft

cloth.

The stainless steel can become tarnished if

it is too much heated. Refer to this you

must not cook with potstones, earthenware

pans or cast iron plates. Do not use alumi-

nium foil to prevent damage the top during

operation.

Removing the dirt:

1. – Remove immediately: melting plas-

tic, plastic foil, and food containing

sugar.

– Stop the appliance and let it cool

down before you clean: limescale

rings, water rings, fat stains, shiny

metallic discolorations. Use a special

cleaner applicable for surface of hob.

2. Clean the appliance with a damp cloth

and some detergent.

3. At the end rub the appliance dry with

a clean cloth.

In order to properly place the pan supports,

make sure that the arms of the pan support

are positioned in correspondence with the

hole placed at the base of the burner. This

way, the pan support will be stable and

fixed.

Cleaning of the spark plug

This feature is obtained through a ceramic

ignition candle with a metal electrode. Keep

these components well clean to prevent dif-

ficult lighting and check that the burner

crown holes are not obstructed.

Periodic maintenance

Periodically speak your local Service Force

Centre to check the conditions of the gas

supply pipe and the pressure adjuster, if fit-

ted.

WHAT TO DO IF…

Problem Possible cause Remedy

There is no spark when lighting

the gas

• There is no electrical supply • Make sure that the unit is

connected and the electrical

supply is switched on.

• Control the fuse. If the fuse is

released more than one time,

refer to a qualified electrician.

• Burner cap and crown are

placed uneven

• Make sure that the burner

cap and crown are in correct

positions.

electrolux 21

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Electrolux ehg6833x Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info