Bedienungsanleitung Electrolux eoc 69611 x (Seite 29 von 80) (Deutsch, Englisch, Holländisch, Französisch)

330993

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

3. Set the temperature. Touch OK to con-

firm.

Switching off the heating function

Touch

to cancel the procedure.

The display shows the main menu.

Setting the oven temperature

Touch + or - to set the temperature.

The appliance starts to heat.

When the appliance operates at the set

temperature, an acoustic signal

sounds.

Showing the oven temperature

Touch + or -at the same time.

The display shows the oven temperature.

Heat-up indicator

When you activate an oven function, the

bar on the display comes on. The bar

shows that the temperature increases.

Rapid heat-up indicator

For some oven functions the rapid heat-up

function decreases the heat-up time auto-

matically. The bar of the indicator moves

from right to left until the oven reaches the

target temperature.

Residual heat indicator

When you deactivate the appliance, the dis-

play shows the residual heat. You can use

the heat to keep the food warm.

CLOCK FUNCTIONS

Symbol Function Description

Minute Minder

To set a countdown (max 2 hours 30 minutes). This function

has no effect on the operation of the appliance.

Duration

To set how long the appliance has to be in operation (max. 23 h

59 min).

End Time

To set the switch-off time for an oven function (max. 23 h 59

min).

You can use Duration and End Time at

the same time, if the appliance is acti-

vated and deactivated automatically

later.

If you set the time for a clock function, the

time starts to count down after 5 seconds.

If you use the clock functions Duration

and End Time , the heating elements

deactivate after 90% of the set time.

The appliance uses the residual heat to

continue the cooking process until the

time ends (3-20 minutes).

Setting the clock functions

1. Set a heating function.

Touch

again and again until the

display shows the necessary clock func-

tion and the related symbol.

3. Touch + or - to set the necessary time.

Touch OK to confirm.

After 90% of the set time, an acoustic

signal sounds. The appliance deacti-

vates. The display shows a message.

4. Touch a sensor field to stop the signals.

With Minute Minder you must activate

the appliance to set the clock function.

With Duration and End Time the appli-

ance deactivates automatically.

With Duration and End Time you must

set the heating function and the tem-

perature first. Then you can set the

clock function.

Heat+Hold

The Heat+Hold function keeps prepared

food warm at 80° for 30 minutes. It acti-

vates after the baking or roasting procedure

ends.

Conditions for the function:

• The set temperature is more than

80°C.

• The function duration is set.

Activating the function

1. Activate the appliance.

2. Select the oven function.

3. Set the temperature above 80°C.

electrolux 29

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Electrolux eoc 69611 x Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info