Bedienungsanleitung Electrolux ESF 66811 (Seite 89 von 100) (Deutsch, Englisch, Holländisch, Französisch)

451740

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

4. Close the lid and press until it locks in

place.

Detergent tablets from different manu-

facturers dissolve at different rates. For

this reason, some detergent tablets do

not attain their full cleaning power during

short washing programmes. Therefore,

please use long washing programmes

when using detergent tablets, to ensure

the complete removal of detergent re-

siduals.

Multi-tab function

This appliance is equipped with the "Multitab

function", that allows the use of the "Multitab"

combi detergent tablets.

These products are detergents with a com-

bined cleaning, rinsing and salt functions.

They can also contain other different agents

depending on which kind of tablets you

choose ("3 in 1", "4 in 1", "5 in 1" etc...).

Check whether these detergents are suitable

for your water hardness. See the manufac-

turers instructions.

Once this function is selected it will remain

active for all following wash programmes.

With the selection of this function the inflow

of rinse aid and salt from each respective

supply container is automatically deactivated

and also the indicator lights for salt and rinse

aid are deactivated.

When using the "Multitab function", the cycle

durations may change. If this is the case, the

running time for the programme is automat-

ically updated on the digital display.

Activate/deactivate the ''Multitab func-

tion'' before the start of a washing pro-

gramme.

Once the programme is running, the

"Multitab function " can NO longer be

changed. If you want to cancel the "Mul-

titab function " you have to cancel the

programme setting and then deactivate

the ''Multitab function''. In this case you

have to set a washing programme (and

desired options) again.

Activation/deactivation of the Multitab

function

Simultaneously press and hold the two Mul-

titab buttons (function buttons D and E) until

the Multitab indicator light comes on. This

means that the function is active.

To deactivate the function press the same

buttons again until the indicator light corre-

sponding to the Multitab function symbol

goes off.

If the drying results are not satisfac-

tory we suggest that you:

1. Fill up the rinse aid dispenser with

rinse aid.

2. Activate the rinse aid dispenser.

3. Set the rinse aid dosage to position

• The activation/deactivation of the

rinse aid is only possible with the Mul-

titab function active.

Activation/deactivation of the rinse aid

dispenser

1. Press the On/Off button. The dishwasher

must be in setting mode.

2. Simultaneously press and hold function

buttons B and C, until the lights of func-

tion buttons A , B, and C start flashing.

3. Press function button B, the lights of

function buttons A and C turn off while

the light of function button B continues to

flash. The digital display indicates the cur-

rent setting.

Rinse aid dispenser deactivated

electrolux 89

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Electrolux ESF 66811 Seite 89

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info