Bedienungsanleitung Electrolux esi 64030 x (Seite 23 von 56) (Englisch, Holländisch, Französisch)

128150

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Start/cancel button

Use the start/cancel button for these opera-

tions:

• To start the washing programme. Refer to

the chapter 'Setting and starting a washing

programme'.

• To cancel a washing programme in pro-

gress. Refer to the chapter 'Setting and

starting a washing programme'.

• To set the water softener level. Refer to the

chapter 'Set the water softener'.

• To deactivate/activate the rinse aid dis-

penser. Refer to the chapter 'Multitab

function'.

Multitab button

Press this button to activate/deactivate the

multitab function. Refer to the chapter 'Mul-

titab function'.

Delay start button

Use the delay start button to delay the start

of the washing programme with an interval

between 1 and 19 hours. Refer to the chapter

'Setting and starting a washing programme'.

Digital display

The display shows:

• Adjusted level of the water softener.

• Activation/deactivation of the rinse aid dis-

penser (only with multitab function on).

• Programme duration.

• Remaining time to the end of the pro-

gramme.

• End of a washing programme, the digital

display shows a zero.

• Number of hours in delay start.

• Fault codes.

Setting mode

The appliance is in setting mode when:

• One or more phase indicator lights are on.

• The time duration of the programme flash-

es in the digital display.

The appliance must be in setting mode for

these operations:

– To set a washing programme.

– To set the water softener level.

– To deactivate/activate the rinse aid dis-

penser.

The appliance is not in setting mode when:

• One or more phase indicator lights are on.

• The time duration of the programme does

not flash.

In this condition cancel the programme to go

back to the setting mode. Refer to the chap-

ter 'Setting and starting a washing pro-

gramme'.

Use of the appliance

Refer to the following instructions for each

step of procedure:

1. Make a check if the water softener level

is correct for the water hardness in your

area. If necessary set the water softener.

2. Fill the salt container with dishwasher salt.

3. Fill the rinse aid dispenser with rinse aid.

4. Load cutlery and dishes into the dish-

washer.

5. Set the correct washing programme for

the type of load and soil.

6. Fill the detergent dispenser with the cor-

rect quantity of detergent.

7. Start the washing programme.

If you use combi detergent tablets ('3 in

1', '4 in 1', '5 in 1', etc.), refer to the

chapter 'Multitab function'.

Setting the water softener

The water softener removes minerals and

salts from the water supply. Minerals and

salts can have bad effect on the operation of

the appliance.

Water hardness is measured in equivalent

scales:

• German degrees (dH°).

• French degrees (°TH).

• mmol/l (millimol per litre - international unit

for the hardness of water).

•Clarke.

Adjust the water softener to the water hard-

ness in your area. If necessary, contact your

local water authority.

electrolux 23

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Electrolux esi 64030 x Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info