Bedienungsanleitung Electrolux esi 64030 x (Seite 29 von 56) (Englisch, Holländisch, Französisch)

128150

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Different brands of detergent dissolve in

different times. Some detergent tablets

do not have the best cleaning results

during short washing programmes. Use

long washing programmes when you

use detergent tablets to fully remove the

detergent.

Multitab function

The multitab function is for combi detergent

tablets.

These tablets contain agents such as deter-

gent, rinse aid and dishwasher salt. Some

types of tablets can contain other agents.

Do a check if these tablets are applicable for

the local water hardness. Refer to the in-

structions from the manufacturer.

When you set the multitab function, it stays

on until you deactivate it.

The multitab function stops automatically the

flow of rinse aid and salt. The rinse aid indi-

cator light and salt indicator light are deacti-

vated.

The programme duration can increase if you

use the multitab function.

Activate or deactivate the multitab func-

tion before the start of a washing pro-

gramme.

You cannot activate or deactivate the

multitab function when the programme

operates. Cancel the washing pro-

gramme, then set the programme again.

To activate the multitab function:

• Press the multitab button. The multitab in-

dicator light comes on.

To deactivate the multitab function:

• Press the multitab button. The multitab in-

dicator light goes off.

Do these steps if the drying results

are not satisfactory:

1. Fill the rinse aid dispenser with rinse

aid.

2. Activate the rinse aid dispenser.

3. Set the rinse aid dosage to position

• You can only activate or deactivate

the rinse aid dispenser when the mul-

titab function is activated.

To activate/deactivate the rinse aid dispens-

er:

The appliance must be switched off.

1. Press and hold the start/cancel button.

Turn the programme knob counterclock-

wise until the programme marker agrees

with the first washing programme on the

control panel.

2. Release the start/cancel button when the

display shows the water hardness level.

3. Turn the programme knob counterclock-

wise until the programme marker agrees

with the second washing programme on

the control panel.

4. The digital display shows the current set-

ting for the rinse aid dispenser.

Rinse aid dispenser de-

activated

Rinse aid dispenser ac-

tivated

5. Press the start/cancel button to change

the setting. The digital display shows the

new setting.

6. Turn the programme knob to the off po-

sition to save the operation.

To use normal detergent again:

1. Deactivate the multitab function.

2. Fill the salt container and rinse aid

dispenser.

3. Adjust the water hardness setting to

the highest level.

4. Do a washing programme without

dishes.

5. Adjust the water softener to the wa-

ter hardness in your area.

6. Adjust the rinse aid dosage.

Select and start a washing programme

Do these steps to set and start a washing

programme:

1. Close the door.

2. Turn the programme knob to set the

washing programme. Refer to the chap-

ter 'Washing programmes'.

electrolux 29

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Electrolux esi 64030 x Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info