Bedienungsanleitung Electrolux esi 67010 x (Seite 31 von 104) (Deutsch, Englisch, Holländisch, Französisch)

127575

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Cancel button

With this button you can cancel a washing

programme or a delay start in progress.

Programme selection buttons

Press one of these buttons until the pro-

gramme indicator light of the desired pro-

gramme comes on.

Save energy button

This function decreases the temperature in

the drying phase. Energy saving is between

10% and 25%.

Dishes can be wet at the end of the pro-

gramme. In this condition we recom-

mend, to open the dishwasher door and

keep it ajar and let dishes dry naturally.

This function can be set with all washing pro-

grammes. The related indicator light comes

on when you press the button.

The save energy function has no effect on

some programmes. Refer to 'Washing pro-

grammes' for the list of programmes where

save energy has or not effect.

Delay start button

You can delay the start of the programme for

between 1 and 19 hours.

Refer to 'Select and start a washing pro-

gramme' chapter for the set of this function.

The digital display

The digital display indicates:

• the level of hardness to which the water

softener is set,

• the approximate remaining time of the run-

ning programme,

• activation/deactivation of the rinse aid dis-

penser ( ONLY with multitab function ac-

tive),

• the end of a washing programme (a zero

will appear in the digital display),

• the countdown for the delay start,

• fault codes concerning malfunction of the

dishwasher.

Function buttons (A, B and C)

The following functions can be set using

these buttons:

• adjustment of the water softener level,

• activation/deactivation of the rinse aid dis-

penser when multitab function is active.

Setting mode

The appliance must be in setting mode

when you:

– select a washing programme,

– adjust the water softener level,

– activate/deactivate the rinse aid dis-

penser.

Switch on the appliance.

– All programme indicator lights come on,

the appliance is in setting mode.

Switch on the appliance.

– Only one programme indicator light comes

on, the last selected programme is still set.

In this case, to go back to the setting

mode, you must cancel the programme.

– Simultaneously press and hold the cancel

button until all the programme indicator

lights come on. The programme has been

cancelled and the appliance is now in set-

ting mode.

First use

Before using your dishwasher for the first

time:

• Ensure that the electrical and water con-

nections comply with the installation in-

structions

• Remove all packaging from inside the ap-

pliance

• Set the water softener level

• Pour 1 litre of water into the salt container

and then fill with dishwasher salt

• Fill the rinse aid dispenser

If you want to use combi detergent

tablets such as: '3 in 1', '4 in 1', '5 in

1' etc. set the multitab function. (Re-

fer to 'Multitab function').

Setting the water softener

The dishwasher is equipped with a water

softener designed to remove minerals and

electrolux 31

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Electrolux esi 67010 x Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info