Bedienungsanleitung Electrolux esl66010 (Seite 24 von 84) (Deutsch, Englisch, Holländisch, Französisch)

123925

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

• Remaining time to the end of the pro-

gramme.

• End of a washing programme. The display

shows a zero.

• Number of hours in delay start.

• Fault codes.

• Activation/deactivation of the audible sig-

nals.

Programme selection buttons

With these buttons you can select the wash-

ing programme. Press a programme button,

the related indicator light comes on. Refer to

'Washing programmes' chapter for more da-

ta about the washing programmes.

Delay start button

Use the delay start button to delay the start

of the washing programme with an interval

between 1 and 19 hours. Refer to the chapter

'Setting and starting a washing programme'.

Function buttons

Use the function buttons for these opera-

tions:

• To set the water softener. Refer to the

chapter 'Setting the water softener'.

• To deactivate/activate the audible signals.

Refer to the section 'Audible signals'.

• To deactivate/activate the rinse aid dis-

penser, when multitab function is active.

Refer to the chapter 'Multitab function'.

Setting mode

The appliance is in setting mode when all the

programme indicator lights are on.

The appliance must be in setting mode for

these operations:

– To set a washing programme.

– To set the water softener level.

– To deactivate/activate the audible signals.

– To deactivate/activate the rinse aid dis-

penser.

The appliance is not in setting mode when

only one programme indicator light is on.

Cancel the programme to go back to the

setting mode. Refer to the chapter 'Setting

and starting a washing programme'.

Audible signals

You can hear an audible signal:

• At the end of the washing programme.

• During the setting of the level of the water

softener.

• When the appliance has a malfunction.

The activation of the audible signals is set at

the factory.

Do these steps to deactivate the audible sig-

nals:

1. Switch on the appliance.

2. Make sure that the appliance is in setting

mode.

3. Press and hold function buttons B and C

until the indicator lights of function but-

tons A, B and C start to flash.

4. Release function buttons A and B.

5. Press the function button C.

– Indicator lights for function buttons A

and B go off.

– Indicator light for function button C

flashes.

– The digital display shows the setting.

Audible signals deactiva-

ted

Audible signals activated

The audible signals are activated.

6. Press the function button C again.

– The digital display shows the new set-

ting.

The audible signals are deactivated.

7. Switch off the appliance to save the op-

eration.

Do these steps to activate the audible sig-

nals:

1. Do the above procedure until the digital

display shows necessary setting.

Use of the appliance

Refer to the following instructions for each

step of procedure:

1. Make a check if the water softener level

is correct for the water hardness in your

area. If necessary set the water softener.

2. Fill the salt container with dishwasher salt.

3. Fill the rinse aid dispenser with rinse aid.

4. Load cutlery and dishes into the dish-

washer.

5. Set the correct washing programme for

the type of load and soil.

24 electrolux

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Electrolux esl66010 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Electrolux esl66010

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info