310348
13
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
ENGLISH
Example:
In this case, both the
drain and the spin (at
the speed provided for
the selected type of
fabric) will be
performed.
This button allows you also to select special
programmes, such as RINSES, SPIN and DRAIN.
• If the machine is already switched on because it
has just performed a washing programme, proceed
as follows:
- depress SKIP/RESET once or repeatidly to cancel
the previously performed programme;
- select the type of fabric by means of button
“ÇAMASIR”;
- select the special programme:
• RINSES (DURULAMA)
Depress SKIP/RESET once, the pilot light YIKAMA
(WASH) goes out.
• SPIN (SIKMA)
Depress SKIP/RESET twice, the pilot lights
YIKAMA (WASH) and DURULAMA (RINSES) go
out.
• DRAIN (BOÇALTMA)
Depress SKIP/RESET three times, the pilot lights
YIKAMA (WASH), DURULAMA (RINSES) and
SIKMA (SPIN) go out.
Example:
In this case the machine
will perform the rinses
followed by the spin.
• If the machine is switched off:
- depress ON/OFF (AÇMA/KAPAMA) button to
switch it on;
- select the type of fabric by means of button
“ÇAMAÇIR”;
- select the special programme as previously described.
PREWASH
ÖN YIKAMA
WASH
YIKAMA
RINSES
DURULAMA
SPIN
SIKMA
DRAIN
BOSALTMA
PREWASH
ÖN YIKAMA
WASH
YIKAMA
RINSES
DURULAMA
SPIN
SIKMA
DRAIN
BOSALTMA
11 DELAY START button
(GECIKTIRME)
This button makes it possible to delay the starting of
the programme by up to 24 hours. The delay you
have selected is shown on the display for about 5
seconds; afterwards, the duration of the programme
reappears.
You must select this option after you have set the
programme and before you press the
START/PAUSE button.
The time value shown on the display will decrease
by one unit every hour.
You can change the delay time at any moment,
before you press the START/PAUSE button.
If you have already pressed the START/PAUSE
button, and you wish to change or cancel the delay
time, proceed as follows:
• set the washing machine to PAUSE by pressing the
START/PAUSE button;
• press the DELAY button until the display shows the
desired delay time or
• press the DELAY button once, to erase the delay
time. The display will indicate “0h”.
• press the START/PAUSE button again.
Important!
The door will be locked throughout the delay time
(DOOR LOCKED light lit).
If you need to open the door, you must first set the
washing machine to PAUSE by pressing the
START/PAUSE button. After you have closed the
door, press the START/PAUSE button again.
12 Programme phase indicator lights
When you select a programme, the lights relevant to
the phases that form the programme light up.
After you have started
the programme, only
the light relevant to
the phase that is
currently being carried
out will remain lit.
PREWASH
ÖN YIKAMA
WASH
YIKAMA
RINSES
DURULAMA
SPIN
SIKMA
DRAIN
BOSALTMA
13
132993580•EW1220/1620N•gb 07/07/03 11:22 Pagina 13
13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Electrolux ew 1620 n neat 1600 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info