639010
4
Zoom out
Zoom in
Vorherige Seite
1/4
Nächste Seite
Check that the door gasket seals all around when the
door is closed and that the door moves freely
Move cover plate from one handle mould to the otherone
D
OOR PANEL
T
he door panel can easily be mounted or changed. The
d
imensions of the panel must be:
Height .........................722mm
Width .........................504mm
Thickness....................max3.8mm
Remove the door, see REPOSITIONING THE HINGES.
Remove the lower trim moulding and then withdraw the
panel by sliding it downwards.
Fit the new panel in place and slide it up as far as possi-
ble.
Fit the trim moulding back in place.
I
NSTALLATION
T
he room should have a capacity (length x width x height)
o
f at least 20 m
3
and have a window (which can be opened)
o
r a door to the outside.
I
t is important that the refrigerator is not subject to radiation
o
f heat from a stove etc.
F
or best performance also at high ambient temperatures
t
here must be a free air circulation over the cooling unit at
t
he rear of the refrigerator.
T
he refrigerator is designed for a free-standing installation
a
nd the clearance to side walls etc., should be at least 5 cm
(
2'').
L
P GAS CONNECTION
T
he refrigerator is designed for operation on LP gas, the
p
ressure of which must be 28 mbar for Butane and 37 mbar
f
or Propane. Check that this is stated on the data plate.
T
he refrigerator is not designed for operation on town gas or
n
atural gas.
T
he gas installation should only be carried out by an autho-
r
ized gas fitter.
T
he gas supply pipe should be connected to the gas inlet
p
ipe on the right hand side of the gas control valve by
m
eans of a suitable threaded coupling.
I
n making the connection to the refrigerator, a union gas
c
ock of an approved bottled-gas type must be incorporated
i
n the supply line in a position which is readily accessible to
t
he user. For eventual servicing purposes, the union should
b
e on the outlet side of the cock and the pipework should
b
e positioned so as not to prevent the refrigerator from
b
eing readily withdrawn.
E
LECTRICAL CONNECTION
T
he electrical installation must be carried out in a proper
a
nd durable manner, taking into account all relevant regu-
l
ations and codes of practice. For mains voltage operation,
i
t is important that the circuit to and in the caravan is effec-
t
ively earthed.
A
LL MAINS VOLTAGE WIRING IN THE CARAVAN MUST
B
E INSTALLED IN ACCORDANCE WITH CURRENT
I
.E.E. REGULATIONS INCLUDING THE USE OF AN
O
UTLET AND COUPLER TO BS4343/- CEE17.
F
or connection to a 230 V electricity supply, the refrigerator
h
as a 3-core mains lead which is intended for connection to
a
properly earthed plug and socket outlet. The socket outlet
s
hould be fitted in the caravan in a position readily accessi-
b
le to the user, within reach of the mains lead. In the United
K
ingdom, the plug and socket outlet should be of the non-
r
eversible type.
I
MPORTANT: The wires in the mains lead of this appliance
a
re coloured in accordance with the following code:
G
REEN-AND-YELLOW = EARTH
B
LUE = NEUTRAL
B
ROWN = LIVE
A
s the colours of the wires may not correspond with the
c
oloured markings identifying the terminals in your plug, in
t
he United Kingdom, proceed as follows:
T
he wire which is coloured GREEN-AND-YELLOW must be
c
onnected to the terminal in the plug which is marked with
t
he letter E or by the earth symbol , or coloured green
o
r green-yellow.
T
he wire which is coloured BLUE must be connected to the
t
erminal which is marked with the letter N or coloured black.
T
he wire which is coloured BROWN must be connected to
t
he terminal which is marked with the letter L or coloured
r
ed.
W
ARNING - THIS APPLIANCE MUST BE EARTHED.
I
n the United Kingdom, the plug or circuit to the refrige-rator
m
ust be fitted with a fuse not greater than 5 amps. If a 13
a
mp.(B.S.1363) fused plug is used, it should be fitted with a
3
amp. fuse. In other countries, the fuse rating will depend
u
pon the voltage and local practice.
P
lug the 230 V refrigerator power cord into an easily acces-
s
ible wall socket.
T
he notations in the wiring diagramme (fig. 2) are:
G
. Electric thermostat
H
. Heating element, 230 V
I
. Switch for 230 V operation
CAUTION! CHECK THAT THE GAS SUPPLIED TO THE
REFRIGERATOR IS AT THE CORRECT PRESSURE.
SEE THE REDUCING VALVE ON THE LP GAS CON-
TAINER.
Electrical leads must be routed and secured so that
they cannot come into contact with hot or sharp parts
of the refrigerator.
8
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Electrolux S105G wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Electrolux S105G

Electrolux S105G Bedienungsanleitung und Installationsanweisung - Deutsch - 4 seiten

Electrolux S105G Bedienungsanleitung und Installationsanweisung - Holländisch - 4 seiten

Electrolux S105G Bedienungsanleitung und Installationsanweisung - Französisch - 4 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info