Bedienungsanleitung Electrolux WASL3T (Seite 37 von 48) (Deutsch, Englisch, Französisch, Italienisch)

709053

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Dispenser box

Prewash

Wash

Softener (do not fill above the MAX symbol

)

SAFETY INFORMATION

Please read these points carefully before in-

stalling and using your appliance. Keep this

user manual with your appliance.

General safety

• Do not modify or attempt to modify this

appliance. This would put yourself in dan-

ger.

• Ensure that all coins, safety pins, brooch-

es, screws etc have been removed be-

fore starting a washing programme. If left

in washing, they can seriously damage

the appliance.

• Use the recommended quantity of deter-

gent.

• Put small items together (socks, belts

etc.) in a small linen bag or pillow case.

• Unplug and close inlet hose tap after us-

ing appliance.

• Always disconnect the power supply

from the appliance before cleaning or

maintenance.

•Do not machine wash clothes with rib-

bing, unfinished or torn material.

Installation

• Unpack or ask for the appliance to be

unpacked immediately upon delivery.

Check the outside of the appliance is not

damaged in any way. Report all transit

damage to your retailer.

• Remove all transit bolts and packaging

before installing the appliance.

• Connection to the water supply must be

carried out by a qualified plumber.

• If your domestic electrical circuit needs

adapting to allow the appliance to be

plugged in, use a qualified electrician.

• Ensure that, after installation, the power

cable is not trapped under the appliance.

• If the appliance is installed on carpeted

floor, ensure that the carpet does not ob-

struct any ventilation ducts located at the

base of the appliance.

• The appliance must be equipped with an

earthed power plug which conforms to

regulations.

• Before connecting your appliance to the

power supply, carefully read the instruc-

tions in the chapter entitled “Electrical

connection”.

• Replacing the power cable should only

be carried out by an authorised service

engineer.

• The manufacturer cannot be held re-

sponsible for any damage resulting from

incorrect installation.

Precautions to be taken against frost

If your appliance is exposed to tempera-

tures below 0°C, the following precautions

must be taken:

• Close the tap and disconnect the inlet

hose.

• Place the end of this hose and the drain

hose in a basin on the floor.

• Select the Drain programme let it run until

the end of the cycle.

• Disconnect the appliance from the power

supply by turning the programme selec-

tor to “Stop”

• Unplug the appliance.

• Replace the inlet hose and drain hose.

This way, the water remaining in the hoses

will be drained away, avoiding any ice for-

mation which would damage your appli-

ance.

Before turning your appliance on again, en-

sure that it is installed in an area where the

temperature will not fall below freezing.

electrolux 37

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Electrolux WASL3T Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info