Bedienungsanleitung Electrolux xxl box 3 ergospace (Seite 6 von 56) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

319160

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

Putting Ergobox back

Make sure Ergobox and the filters are dry.

Make sure the motor filter is in place. (See

also Replacement of filter(s).) Make sure the

washable HEPA filter is in place. (See also

Replacement of filter(s).)

28 Fix the front and rear parts together

with the 3 hooks.

Close the catch by fixing the metal fastening.

29 Put Ergobox back in the cleaner.

Replacement of the filter(s)

The more often the better for the efficiency

of the cleaner. Never use the vacuum cleaner

without filter(s).

A Motor-filter (Ref. No. EF 54)

Grasp Ergobox and lift it out as

shown in the illustration.

30 Pull the filter holder upwards until

it comes away from the groove.

Carefully pull the old, dirty filter(s) out

of the filter holder and replace with a

new filter(s).

31 Reinstall the filter holder containing

the new filter(s).

B Washable HEPA filter (Ref. No. EF

75B). Follow steps 22, 23, 24.

Turn the washable HEPA filter anti-

clockwise and pull it away. To put

a clean one back, push and turn it

clockwise.

Cleaning the hose and nozzle

The vacuum cleaner stops automatically

if the nozzle, tube, hose or filters become

blocked. In such cases, disconnect from

mains and allow to cool for 20-30 min-

utes. Clear blockage and/or replace filters

and restart.

Tubes and hoses

Use a cleaning strip or similar to clear

the tubes and hose.

Hose handle could be dismantled

from hose if cleaning is needed.

35 It may also be possible to remove the

obstruction in the hose by squeez-

ing it. However, be careful in case

the obstruction is caused by glass or

needles caught inside the hose.

Note: The warranty does not cover any dam-

age to the hose caused by cleaning it.

Cleaning the floor nozzle

36* Press each wheel-hub and draw away

the wheels. Use the crevice nozzle to

clean the wheel axles. Remove dust-

balls, hair or other objects that may

be entangled. Replace the wheels by

pressing them onto the axles.

37* Larger objects can be accessed by

removing the connection hose from

the nozzle (press the small catches

located on each side and simultane-

ously draw the connection tube out-

wards in an upright position).

38* Remove the object(s) and replace the

connection hose.

39 To avoid loss of suction power, fre-

quently clean the carpet/hard floor

nozzle. The easiest way to clean it is

by using the hose handle.

Cleaning the turbo nozzle*

Disconnect the nozzle from the

vacuum cleaner tube and remove

entangled threads, etc. by snipping

them away with scissors. Use the

hose handle to clean the nozzle.

Troubleshooting

The vacuum cleaner does not start

• Check that the cable is connected to

the mains.

• Check that the plug and cable are not

damaged.

• Check for a blown fuse.

The vacuum cleaner stops

• Check if Ergobox is full. If so, empty it

and clean both the box and the filter

before putting it back in the cleaner.

• Is the nozzle, tube or hose blocked?

• Are the filters blocked?

Water has entered the vacuum cleaner

It will be necessary to replace the motor

at an authorised Electrolux service cen-

tre. Damage to the motor caused by the

penetration of water is not covered by the

warranty.

Consumer information

Electrolux decline all responsibility for all

damages arising from any improper use

of the appliance or in cases of tampering

with the appliance.

This product is designed with the environ-

ment in mind. All plastic parts are marked

for recycling purposes. For details see our

web site: www.electrolux.com

If you have any comments on the cleaner

or the Instructions for Use booklet please

e-mail us at: floorcare@electrolux.com

If you can´t find accessories to your Electrolux

vacuum cleaner, please visit our website at

www.electrolux.co.uk or call 08706 055 055.

*Certain models only. **Execution depending on model.

ergobox_040819.indd 5ergobox_040819.indd 5 8/20/04 5:04:37 PM8/20/04 5:04:37 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Electrolux xxl box 3 ergospace Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info