Bedienungsanleitung Electrolux zb 271b (Seite 7 von 22) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch)

318528

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Unpacking and assembly

Check that all the parts are in the box.

1. Fit the handle by carefully inserting it into the vacuum compartment. Take

care to ensure that the cable does not jam.

2. Secure the handle by tightening the locking screw supplied. Use a Phillips

screwdriver or a coin.

3. Position the charging station close to a mains socket (well away from

heat sources or wet places). Insert the adaptor into the mains socket and

connect the charging station.

4. The wall unit can also be mounted on a wall etc. Always ensure that the

wall can bear the weight of the Ergorapido.

Charging

5. Hang Ergorapido on the charging station (NB – always make sure that

the Ergorapido is turned off). The indicator lights will come on once

Ergorapido has made contact with the charging station. It takes 8-10

hours to fully charge the batteries before the ﬁ rst use. When Ergorapido

is totally discharged, approximately 12-16 hours’ charging is required for

the battery to regain full capacity. In order to ensure that it is always ready

for use, Ergorapido should be left on charge when not being used. The

adaptor may become warm during charging – this is normal.

Vacuuming ﬂ oors and carpets

You should regularly check that the nozzle cushions and the brush roller are

clean in order to avoid scratching sensitive ﬂ oors

6. Start Ergorapido by pushing the on/off button away from you.

– ﬁ rst position = intermediate power for longer periods of use

– second position = full power

Vacuuming tables, furniture, car seats etc.

7. Remove the hand unit by pressing in both the release buttons at the same

time. The hand unit will now come free and can easily be removed.

8. The crevice nozzle can be pulled out in order to reach awkward places.

9. If anything gets stuck in the crevice nozzle, it can be completely removed

from the hand unit. Depress the release button and pull out the crevice

nozzle. Clean it and remove anything that has got stuck in the air duct.

Emptying/cleaning

A. Quick emptying of the dust container

10. Open the quick emptying cover and empty the contents into a suitable

vessel or bag. Press back the quick emptying cover until it clicks into

place.

B. Quick cleaning using the vacuum cleaning cover

11. Lift up the vacuum cleaning cover. Vacuum clean the dust container and

ﬁ lter by placing the hose handle of another vacuum cleaner against the

vacuum cleaning hole.

C. Careful cleaning of the dust container and ﬁ lters

12. Remove the whole dust container by depressing the release button on

either side of the container. Take out the dust container, separate both the

ﬁ lters and empty the contents of the dust container into a suitable vessel

or bag.

13. The dust container, preﬁ lter and ﬁ ne ﬁ lter can be shaken clean or cleaned

and rinsed using warm water. Make sure that the parts are dry before they

are reassembled.

Reassemble in reverse order.

Cleaning the roller brush

If the roller brush becomes blocked or jammed for any reason, the indicator

light on the ﬂ oor nozzle will go out. The roller brush may then need to be

cleaned. First turn off the Ergorapido, then carefully use a pair of scissors or

a sharp knife to remove any items such as threads that may have become

entangled.

14. If the roller brush needs to be lifted out – open the hatch cover by turning

the locking screw anti-clockwise with a coin or other tool. The hatch cover

will come slightly free and can now be removed.

15. Lift out the roller brush and clean it. Replace the roller brush and make

sure that it ﬁ ts into its guiding tracks, and make sure that it can spin

freely.

16. Replace the hatch cover and lock by turning anticlockwise as far as

possible.

Cleaning of bellows

Sometimes objects can get stuck in the bellows, and this can affect suction

power.

17. Remove the bellows by loosening the small screw and then pulling the

bellows from the attachment. Clean the bellows using a stick or similar

object. Place the bellows back in the attachment and lock using the

locking screw.

Cleaning of wheel axles

If a wheel is jammed by threads or dirt:

18. Remove the wheels by carefully prizing them loose using a screwdriver

inserted into the cavity. Remove threads or any other objects that may

have become jammed in the wheels axles. Reassemble the wheels by

pressing them tightly together.

NB:

• Never vacuum in wet places.

• Never vacuum near ﬂ ammable gases, liquids etc.

• Never vacuum up sharp objects such as shards of glass etc.

• Never vacuum up liquids, as these can severely damage the machine.

• Never vacuum up ash, lit cigarette ends etc.

• Never vacuum up ﬁ ne dust from plaster, concrete, ﬂ our or ash, for example.

• Do not leave the vacuum cleaner in direct sunlight.

• Avoid exposing the vacuum cleaner or battery to strong heat.

• The battery must not be dismantled, short-circuited, placed against a metal

surface or exposed to strong heat.

Disposal

If an Ergorapido is to be disposed of, the batteries should be removed. Used

batteries should never be disposed of with household waste. These should

always be taken to a recycling station.

Removal of batteries ( see illustration page 2)

19. NB – Ergorapido must not be connected to the charging station while the

batteries are being removed.

• Undo the four screws.

• Carefully lift the hood.

• Unclip the connecting cables and lift out the batteries.

Servicing or repairs

In cases of breakdown or faults, your Ergorapido must be taken to an

authorised Electrolux service centre.

English

Electrolux zb 271b Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info