Bedienungsanleitung Elektra Beckum MIG 160 (Seite 3 von 14) (Englisch)

658052

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

1 Specifications

2 Taking a Single-Phase Machine Into Operation

2.1 Taking a Combination 1-Ph/2-Ph Machine into Operation

3 General Information for Welding Transformer/Rectifier Operators

3.1 Overview of Stick Electrodes and their correct Use

3.1.1 Care of Stick Electrodes

3.1.2 Function of the Stick Electrode Coating

3.1.3 Classification of Stick Electrodes according to DIN 1913

3.1.4 Selecting Suitable Electrodes for a Welding Task

3.1.5 Arc Starting and Arc Burning

3.1.6 Welding Positions According to DIN 1921

4 Welding Hints

4.1 Weld Types

4.2 Weld Flaws and possible Causes - Shown on Fillet Welds

5 Accessories and Accessory Maintenance

6 Wiring Diagrams

Contents

ENG

User Responsibility

You have bought a high-quality electric arc welding machine, designed and built by specialists with many years of

experience. A machine built to last, giving a long service life.

All models have the correct size power supply cable fitted, the transformer‘s core is made from top-quality insulated

sheet steel, to keep eddy currents and cyclic magnetization losses to an absolute minimum.

Please read the instructions given in the manual in order to fully utilize the potential of your machine.

Know and adhere to all local safety codes and regulations governing the operation of electric arc welding machines.

The operation of the welding divice in the data processing system environment is not allowed!

This product shall only be used as specified. Any other use requires the written consent of Elektra Beckum AG,

P.O.Box 1352, D-49703 Meppen, Germany

Please contact your dealer for any warranty claims.

Warranty work will essentially be carried out by service centres authorised by us. Repairs beyond the warranty

period may be carried out only by our authorised service centres.

Please preserve all repair invoices! We reserve the right to make technical changes!

We recommend attending a welding course at a recognised technical institute.

2 Taking a Single-Phase Machine into Operation

This machine is to be connected to the power mains via a Earth Fault Circuit Interrupter of 30 mA capacity. Worn

or damaged power cables should be replaced immediately by a qualified electrician.

Do not operate this machine with a damaged power cable, danger of personal injury by electric shock.

Children are not permitted to operate this machine.

Connect to an earthed single-phase 230/240 V outlet, protected by a 16 A time-lag fuse. Operating other electric

machines or appliances on the same circuit while welding is only possible to a very limited extent and not

recommended.

Earth and welding cable are firmly attached to the machine.

Polarity does not matter with AC welding current.

1 Specifications

Model SB 160 C SB 200 CT SB 200 CT

Main voltage 230/400 V 240 V 230/400 V

Mains frequency 50/60 Hz 50 Hz 50/60 Hz

Welding steps stepless stepless stepless

Stepless at 230 V 32 - 38 V 47 - 55 V 31 - 39 V

Stepless at 400 V 38 - 46 V 41 - 50 V

Max. OCV at 230 V 16 A time-lag 32 A time-lag 16 A time-lag

Max. OCV at 400 V 16 A time-lag 20 A time-lag

Insulation class H H H

Protection class IP 21 IP 21 IP 21

Setting range, stepless 230 V 30 - 110 A 70 - 180 A 20 - 110 A

Setting range, stepless 400 V 65 - 155 A 60 - 180 A

Cooling self fan fan

Weldable electrodes at 230 V Ø 1.6 - 2.5 mm Ø 2,0 - 4,0 mm Ø 1.6 - 2.5 mm

Weldable electrodes at 400 V Ø 2.0 - 3.25 mm Ø 2.0 - 4.0 mm

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elektra Beckum MIG 160 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info