THERMO-
SWITCH
SOCKET
TT
TT
SS
SS
2200
2200
MADE IN CZECH REPUBLIC
THERMO-SWITCH SOCKET
TT
TT
SS
SS
2200
2200
TS20 is a digitally switched socket for automatic regulation of electrical heat-
ing systems (direct heating bodies, towel driers, fires) in family houses, flats,
offices. Up to six time intervals with three temperature levels can be set for
each day.
Further advantages:
Specification of TS 20:
Power 230V AC
Number of adjustable temp. 3 different temperatures for each day
Hysteresis 0,1 to 2°C in steps of 0,1°C
Minimal programming time 10 minute
Range of possible temp. 3 to 40°C
Step of temperature setting by 0,5°C
Minimal step of indication 0,1°C
Measurement accuracy 0,5°C
Back-up battery NiCd 2,4 V, > 100 hours
Output relay, max. 16A
MADE IN CZECH REPUBLIC
ELEKTROBOCK CZ s.r.o.
Blanenská 1763
Kuřim 664 34
Tel./fax: +420 541 230 216
http:// www.elbock.cz
Send the socket for guarantee and after-guarantee service to manufacturer's address.
Table for registration of your programs
1 23456
Mon
Tue
Wed
Thu
Fri
Sat
Sun
day
progr.
The temperature
and time set
Installation:
1, Connect TS20 in 230V/50 Hz socket and let it charge for approx. 12 hours.
2, Program it according to instructions (register respective data in the table)
3, Connect the heating body you want to regulate.
4, To be installed in rooms with relative humidity lower than approx. 95%
Error messages:
If following error message is shown on the display,
contact immediately the manufacturer (it is dealing with
a failure of temperature sensor).
Utilization examples:
“ OFF “ function:
Press the “ Fce “button, by pressing " +/- " button select OF:F
function and confirm by ” “. button. In this way, TS20 is
permanently switched off. In this mode, symbol OF:F and data on current temper-
ature/time are showed alternatively on the display. To cancel this function, press
"Fce" button and select different mode with using of "+/-" buttons.
different temperature program for each day
the possibility to set three temperature levels
( , , P )
setting the HYSTERESIS in the range from 0,1°C to 2°C
simple control and programming
possibility to make a short-term change in program temperature
permanent switching off of the appliance ( OFF )
temperature regulation at steps of 0,5°C
well-arranged display
back-up battery NiCd 2,4 V, for more than 100 operating hours
electric
heating
plates
direct
heating
bodies
electric
tubular
radiators
TTeemmppeerraattuurree rreegguullaattiioonn ooff
ccoonnnneecctteedd aapppplliiaannccee
DESCRIPTION OF CONTROLS
Fce = selection of functions
P = selection of temperatures
i = confirmation (ENTER),
information on required temperature
(PO:t), present time/temperature
(CL:O/tE:P),sum of operating hours
(SU:MA), and day (dE:n)
+/- =
setting of temperature,
time, functions
Child lock:
It serves for keyboard blocking, as a protection against unauthorized handling.
By simultaneous pressing of ” Fce ”,” P ” and “ - ” buttons the keyboard is
locked
(buttons are inactive). Message LOC(LOCK) is shortly displayed.
The function can be cancelled, e.g. the keyboard unblocked,
by simultaneous pressing of ” Fce ”,” P ” and “ + ”
buttons
(the buttons are again functioning from now).
P = °C
= °C
= °C
(ERROR)
