Bedienungsanleitung Element4 Lucius 140 (Seite 11 von 56) (Deutsch, Englisch, Holländisch, Französisch)

820615

Zoom out

Zoom in

Vorherige Seite

1/56

Nächste Seite

SELECTED

1 2

OFF

1 2

OFF

NOTE: Either continue to PROGRAM 2 and set on and off times

or stop programming at this point, and PROGRAM 2 re-

mains deactivated.

NOTE: PROGRAM 1 and 2 use the same on (Thermostatic) and

off temperatures for , and Daily Timer ( , , , , ,

, ). Once a new on (Thermostatic) and / or off tempera-

ture has been set, that temperature becomes the new

default setting.

NOTE: If , or Daily Timer are programmed for PRO-

GRAM 1 and PROGRAM 2 on and off times, these be-

come the new default times. The batteries must be re-

moved to clear the PROGRAM 1 and PROGRAM 2 on

and off times and temperatures.

AUXILIARY FEATURE (2ND BURNER FEATURE)

The latching solenoid valve will open automatically after ignition

or after switching the system off, so that the maximum flow of

gas is supplied to both burners assisting with the ignition pro-

cess. After pressing the AUX-button the motor will turn 7 sec-

onds in the ON direction until the max. position is reached.

1 2

OFF

ON:

To switch a burner on, press the but-

ton. displayed.

OFF:

To switch the burner off, press the

button.

disappears.

NOTE: The latching solenoid valve cannot operate manually. If

the Receiver battery runs down it will remain in the last

operating position.

ECO MODE

ON:

Press button to enter Eco Mode.

displayed.

OFF:

Press button. disappears.

CIRCULATING FAN OPERATION

Circulating fan has 4 speed levels from

low (1 bar) to high (4 bars).

OFF:

Press button until all 4 speed level

bars disappear.

NOTE: SETTING only. If the fan was not switched off after last

use, it starts automatically 4 minutes after ignition at max-

imum speed and goes to the last set level after 10

sec-onds. The fan stops 10 minutes after the gas is

OFF or at Pilot.

or Daily Timer ( , , , , , , ) selected

▪ Set on time and off time using same procedure as “

Selected” (above).

▪

Set on time and off time for both Saturday and Sunday.

▪ Daily Timer: Unique on and off times may be set for a single

day of the week, for multiple days of the week, or for every day

of the week.

▪ Wait to finish setting.

ON TIME SETTING (PROGRAM 1):

7. , , displayed, is displayed

shortly, and hour ashes.

To select hour press or button.

To conrm press button. , ,

displayed, displayed shortly,

and minutes ash.

or but-

10. To select minutes press

ton.

11. To conrm press button.

OFF TIME SETTING (PROGRAM 1):

12. , ,

displayed, is displayed

13.

14.

shortly, and hour ashes.

To select hour, press or button.

To conrm press button. , ,

displayed, displayed short-

ly, and minutes ash.

or but-

15. To select minutes press

ton.

16. To conrm press button.

SETTING:

1. button and hold until

Press

ashes.

Press

and

button to increase fan speed

button to decrease fan speed.

3. To conrm setting either press but-

ton or wait ( displayed).

11/56

USER MANUAL

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Element4 Lucius 140 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Element4 Lucius 140

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info