Bedienungsanleitung Element4 Modore 100 MKII (Seite 41 von 44) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

667779

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

WARNING



 (also deactivates Program Mode)











SETTING THE ELECTRONIC CODE

(First time use only.)

Radio Frequency Handset

A code is selected automatically for all Mertik Maxitrol electronics



with the handset:





beep is long. After the second beep, release the reset button.



on the handset



is set. If you hear one long beep, this indicates the pairing se-

quence has failed or the wiring is incorrect.

NOTE: This is a one time pairing only, and is not required after

changing the batteries of the handset or receiver.

Figure 18: Receiver Reset Button

GENERAL NOTES

NOTICE

Wiring of valve and receiver must be completed before starting

ignition. Failure to do so could damage the electronics.

Batteries – Handset



Batteries – Receiver

-

tor turns.



        

mains power together with batteries in the receiver for auto-

matic backup in case of power outage.

Software Version

Press

and buttons simultaneously. Software version is dis-

played.

Handset Model Number

Press

and buttons simultaneously. Handset model number

is displayed.

Deactivate Functions







-

activation is complete when the function icon and two horizon-

tal bars are displayed.

NOTE: If a deactivated button is pressed, there is no function,

and two horizontal bars are displayed.

NOTE: Deactivation remains in effect after change of batteries.

Activate Functions



2. To activate a function, press the relevant button and hold for



-

plete. Activation is complete when the function icon is dis-

played.

The following Functions can be Deactivated/Activated

 (To activate press

and buttons simultane-

ously.

displayed and the handset is rendered inoperable

(except for off function).

OPERATING INSTRUCTIONS

-

ommended at the beginning of each heating season.



in the unit the batteries can overheat, leak, and/or explode.

-

-

pact. Each of these conditions can cause the batteries to

overheat, leak, and/or explode.

        

should not be used together. Mixing of various batteries can

cause the batteries to overheat, leak, and/or explode.

Element4 Modore 100 MKII Seite 41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Element4 Modore 100 MKII

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info