Bedienungsanleitung Elica Get Up (Seite 35 von 224) (Alle Sprachen)

784509

Zoom out

Zoom in

Vorherige Seite

1/224

Nächste Seite

T2: Decrease speed / motor off button

press the decrease the intake power, until the extractor hood

is turned off.

press and hold to turn the hood off directly.

L1: Speed indicator LED on

the central LEDs light up according to the intake speed

active/used:

1st speed, LED a will light up

2nd speed, LEDs a+b will light up

3rd speed, LEDs a+b+c will light up

T3: Increase speed button

press to turn the hood on

press to increase the intake power.

T4: "BOOST” – intensive speed - function button

press T4 to activate the intensive intake speed “BOOST 1”,

timed for 30 minutes

this prolonged timing has been designed to guarantee a

suitable cooking time for preparations that release high

amounts of smoke during cooking

Note: after the 30 minutes, the hood will go back to the

previously set intake speed ***

with the motor on “BOOST 1”, press T4 again to activate the

intensive intake speed “BOOST 2”, timed for 7 minutes

Note: after the 7 minutes, the hood will go back to the

previously set intake speed ***

Note: press T4 again, during the 7 minutes, to go back to the

previously set intake speed ***

with the “BOOST1” and “BOOST2” functions active, press:

T2 to go back to the previously set intake speed ***

T3 to go back to the 3rd intake speed

*** the previous intake speed remains visible via the indicator

LEDs L1

if you have set the intensive speed directly with the hood off,

the motor will be turned off after the set time.

While using the “BOOST” functions, the T4 symbol flashes

(“BOOST 1”: white light - “BOOST 2”: blue light)

Filter Saturation indicator lights

At regular intervals, the hood signals the need to perform

maintenance on the filters.

LED L1 (a-b-c) on and flashing light (all indicator lights

flashing together): perform maintenance on the grease filter.

LED L1 (a-b-c) on and alternating light (the indicator lights

turn on in sequence): perform maintenance on the active

carbon filter

Note: The filter saturation indicator is visible within the first 10

seconds on turning on the hood; the saturation indicators must

be reset within this time.

Reset filter saturation indicator:

Press and hold button T3

LED L1 (a-b-c) turns on and off (depending on the type of

filter being reset, the indicator lights flash together or turn on

in sequence); an acoustic signal will confirm the reset

operation.

Activation of filter saturation indicator

Note: this operation must be performed with the hood off.

- Grease filter

This indicator is normally activated

1st prolonged press of buttons T3 and T2

if the indicator is active, button T3 turns on

press button T2, to deactivate it

if the indicator is not active, button T2 turns on

press button T3, to activate it

- Active carbon filter

This indicator is normally deactivated

2nd prolonged press of buttons T3 and T2

if the indicator is active, button T3 turns on

press button T2, to deactivate it

if the indicator is not active, button T2 turns on

press button T3, to activate it

Note: 3rd prolonged press of buttons T3 and T2

to exit settings me nu.

Maintenance

Cleaning

Clean using ONLY a cloth dampened with neutral liquid

detergent. DO NOT CLEAN WITH TOOLS OR

INSTRUMENTS. Do not use abrasive products. DO NOT USE

ALCOHOL!

Grease filter

Traps cooking grease particles.

This must be cleaned once a month (or when the filter

saturation indication system – if envisaged on the model in

possession – indicates this necessity) using non aggressive

detergents, either by hand or in the dishwasher, which must

be set to a low temperature and a short cycle.

When washed in a dishwasher, the grease filter may discolor

slightly, but this does not affect its filtering capacity.

When inserting and removing grease filters and charcoal

filters, please make sure that the extractable unit of the hood

is in open position.

Then remove the front panel ,by pulling on the upper part of

each side at the same time.

The panel turns forward ,so that grease filters can be inserted.

Fig. 18-21

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elica Get Up Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info