Bedienungsanleitung Elica Spot Plus Island (Seite 17 von 148) (Alle Sprachen)

649805

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

Operation

Use the high suction speed in cases of concentrated kitchen

vapours. It is recommended that the cooker hood suction is

switched on for 5 minutes prior to cooking and to leave in

operation during cooking and for another 15 minutes

approximately after terminating cooking.

1 = ON/OFF – Speed increase

2 = Lights ON/OFF

3 = Selection of the desired function

4 = Setting the function in use

5 = The display shows:

a – list of available functions

b – indicator of the function currently in use

c – indicator of the speed in use

d – clock / data related to the function in use

e – saturation of the anti-grease filter

f – saturation of the carbon anti-odour filter

Available functions

SPEED

Switch on/Speed increase:

- press button 1 to switch on the hood

- press button 1 to go to the next speeds, until the hood is

switched off

The extraction speed is shown on the display (c), in the

following manner:

1st speed

performance 40%

***

2nd

speed

performance 60%

***

3rd

speed

performance 80%

***

high

speed

performance 100%

***

OFF

*** the percentage displayed refers to the indicative value of the

performance

The high speed is timed for 10 minutes; to interrupt the timing

and switch off the hood press button 1.

NB= the speed might increase automatically during use, this is

because the control is fitted with a system that protects the

display in case of overtemperatures.

CLOCK

To set the clock:

- press button 3 until moving the indicator(b) on function

“CLOCK”

- press button 4 to access clock setting

- keep button 4 pressed:

• keeping it pressed for one second increases the time by

one minute

• after 10 seconds, each second it is pressed increases the

time by 10 minutes

To store the set time:

- press button 3

TIMER

Stopwatch Function

- press button 3 until moving the indicator(b) on the “TIMER”

function

- press button 4 to access timer setting

- to start the stopwatch: simultaneously press button 3 and

button 4, for 5 seconds

- to stop the stopwatch: simultaneously press button 3 and

button 4, for 5 seconds

Note= after 60 minutes the stopwatch stops automatically

“Countdown” Function

- press button 3 until moving the indicator(b) on the “TIMER”

function

- press button 4 to access timer setting

To set the “Countdown” timer:

- keep button 4 pressed:

• keeping it pressed for one second increases the timer by

one minute

• after 10 seconds, each second it is pressed increases the

timer by 5 minutes

To save the “Countdown” timer

- press button 3

The Timer indicator(b) will start flashing to indicate the

start of the “Countdown”

When the “Countdown” reaches “0:00” the motor is

switched off

Note = to set a new timer, button 4 must be pressed until the

indication “0:00” is displayed again

Note = the maximum countdown setting time is 60 minutes

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elica Spot Plus Island Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info