Bedienungsanleitung Elin KSKGA20 (Seite 12 von 32) (Deutsch, Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

499841

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

12 457

Controllare che la tensione dell’impianto elettrico corrisponda a quella indicata sulla

targhetta caratteristiche posta sul lato sinistro in basso nella parte interna dello scom-

parto frigorifero.

Se la presa a muro è priva di contatto a terra, o se la spina non è adatta al vostro

impianto vi consigliamo di rivolgervi ad un elettricista specializzato.

Non impiegare adattatori o derivatori che potrebbero causare riscaldamenti e bru-

ciature.

Gli apparecchi previsti per il funzionamento a 115V - 60 H:

(sprovvisti di cavo di alimentazione e di spina) devono essere collegati ad una rete di

alimentazione elettrica dotata di un dispositivo che assicuri la disconnessione

onnipolare dell’apparecchio dalla rete stessa, con una distanza di apertura dei con-

COLLEGAMENTO ELETTRICO

Check that the main voltage corresponds to that indicated on the rating plate in the

lower left side inside the refrigerator compartment.

If the wall socket does not have an earth terminal, or if the plug does not fit into the

socket, it is advisable to consult a qualified electrician. Do not use multiple plugs or

adapters as they could cause heating and burning.

Warning: this appliance must be earthed

If this appliance is fitted with a non rewirable plug for which your socket is unsuitable,

the plug should be cut off and an appropriate plug fitted. The removed plug must be

disposed of Insertion of the plug into a 13 Amp socket is likely to cause an electrical

hazard When a nonrewirable plug ora rewirable 13 Amp (BS1363) plug is used it

must be fitted with a 13 Amp ASTA approved (BS1362) fuse. If any other type of plug

is used it must be protected by a 15 Amp fuse either in the plug or at the distribution

board

Important: The wires in the main leads are coloured in accordance

with the following code:

ELECTRICAL CONNECTION

GREEN AND YELLOW - EARTH BLUE - NEUTRAL

BROWN - LIVE

As the colours of the wires in the main lead of your appliance may not correspond

with the coloured marking identifying the terminals in your plug, proceed as follows.

CONNECT GREEN & YELLOW coloured wire to plug terminal marked letter “E” or

earth symbol or coloured green or green & yellow.

CONNECT BLUE coloured wire to plug terminal marked letter “N” or coloured black.

CONNECT BROWN coloured wire to plug terminal marked letter “L“ or coloured

red.

Those appliances designed to operate at 115 V - 60 Hz (not pro-

vided with a power supply cable and plug) must be connected to an

electricity mains supply provided with a device which ensures the

omnipolar disconnection of the appliance from this mains supply,

with a contact break of at least 3 mm (e.g.: bipolar thermal mag-

netic circuit-breaker, bipolar differential circuit-breaker, etc.).

Green and Yellow

to Earth

Blue to

Neutral

13 amp

Fuse

Brown

to Live

Cord

Clamp

tatti di almeno 3 mm. (es.: interruttore magnetotermico bipolare, interruttore differen-

ziale bipolare, ecc. ).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elin KSKGA20 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info