Bedienungsanleitung Elite Digital Smart B plus (Seite 12 von 36) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

782386

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

ENGLISH

NOTES

• Attention: Integrated wireless systems that

work on the same frequency band can

interfere with the data transmission of Digital

Smart B+. In this case, deactivate them.

• Avoid exposure to direct sunlight or cold and

damp environments for prolonged periods of

time when not in use.

• Never use chemical detergents (petrol or

thinners) on any part of Elite Digital Smart B+.

ASSEMBLING THE UNIT

To fit the unit (ref. A) on the frame, follow the

instructions given in the Frame manual.

Plug the resistance unit (ref. B) into a wall

outlet and into the resistance unit, using the

supplied power cord.

USING THE UNIT

Digital Smart B+ is ready for use after mounting

the unit to the frame. You will need a compati-

ble* app, computer and software to display

data and adjust resistance.

The pairing, data collection and resistance-

adjustment phases use the ANT+ and Bluetooth

Smart protocols, while the various modes will

depend on the app/cycle computer.

The connection procedure and the use of the

device depends on the device itself and the

software/app you wish to use. Check the

software/app for instructions on how to

connect and for use during training.

Please check chart 1 page 11 to verify com-

patibility with your smartphone/tablet/cycle

computer.

ATTENTION

• During use of Digital Smart B+ with Elastogel

roller, slight wear of the roller is quite normal.

Tests carried out at Elite show that after conti-

nuous use for 20,000 km, roller wear is around

0.1 mm, and since the total thickness is 10

mm, correct operation of the trainer will not be

affected even with far greater wear. Claims

that are due to improper or careless use, will

not be acknowledged. Slight wear of the part in

rubber is quite normal.

• Using Digital Smart B+ with narrow tyres or

with unsuitable tyre pressures can permanen-

tly damage the Elastogel roller.

• Do not store Digital Smart B+ in wet or damp

places. The electronic components could

become damaged.

• Digital Smart B+ may not comply with the EC

directives if the power adapter supplied (ref. B)

is not used.

• If slipping of the wheel on the Elastogel roller

is noticed, apply a more gradual force on the

pedal. Training with the tyre slipping can per-

manently damage the Elastogel roller.

TROUBLESHOOTING

• The trainer doesn't change the resistance:

if you’re having trouble connecting, try

removing all electronic devices (such as

Smartphones and/or wireless routers) or

changing the transmission channel ¹ and

repeat the pairing process with the app/

software/cycle computer again.

The cadence value is not accurate:

the algorithm that calculates cadence without

a sensor can sometimes vary in accuracy. This

might happen when training with a high peda-

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elite Digital Smart B plus Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info