Bedienungsanleitung Elite Direto XR-T (Seite 34 von 128) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

782409

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

depends on the device / software / app being used only

ANT+ and is also compatible with Bluetooth Smart monitors

allowing connection with monitors by both protocols.

12_USING THE DIRETO XR-T WITH THE

SOFTWARE / APP / DEVICE

We suggest using the My E-Training software/app,

available on iOS, Android, Windows and Mac OS.

My E-Training is a complete system with several training

modes, including videos, conﬁgurable software, Google

Maps races, Internet competitions and much more.

It's possible to use third-party software that is compatible

with the hometrainer communications protocol/standards.

There are several software/apps/devices currently on the

market that can connect to the DIRETO XR-T.

Please refer to the instructions for the speciﬁc software/

app/device for a proper connection to the hometrainer.

Before beginning the connection procedure with any app,

make sure that the hometrainer is powered up and is not

on the energy saver mode. The supplied hometrainer

charger must be connected to a power source.

The hometrainer motherboard features LED lights

indicating the current hometrainer status. Please check the

"Status LED lights" paragraph for an in-depth description.

13_NAME AND LIST OF COMPONENTS

Your DIRETO XR-T hometrainer includes:

N.1 DIRETO XR-T body (A)

N.2 Freehub body spacer (B)

N.1 Chainstay adapter (C)

N.1 Right rotating chainstay adapter L=130-135mm (D)

N.1 Left rotating chainstay adapter L=130-135mm (E)

N.1 Right rotating chainstay adapter L=142mm (F)

N.1 Left rotating chainstay adapter L=142mm (G)

N.1 Quick Release (H)

N.1 Riser block (I)

N.1 Power supply (L)

WARNING: adapters ref. C, D, E, F, G are small sized

components and might easily be misplaced or lost. If

you move the hometrainer it's advisable to remove the

adapters and store them in their bag as they might easily

slip out during transport.

Any spare parts are available in our online store or by

directly contacting Elite and/or your country's distributor.

14_ASSEMBLING

- Disassemble the DIRETO XR-T body (Ref. A)

- Place the DIRETO XR-T body (Ref. A) vertically and hold it

in place with the upper handle

- Spread the side legs to its max extent (Pic. 1)

- Tighten the safety knob (Pic. 2).

- Make sure the hometrainer is stable (Pic. 3), otherwise

operate on the adjustable feet (Pic. 4).

15_INSTALLING THE SPROCKET CASSETTE

ON THE DIRETO XR-T

1) Assemble the sprocket cassette on the freehub by

aligning the groove proﬁles.

- 2 spacers (Ref. B) are usually needed for the Shimano®/

SRAM® 9 speed cassette (Pic. 5), 1 spacer for the 10

speed cassette (Pic. 6) and no spacer is required for the 11

speed cassette (Pic. 7). Depending on the cassette brand

you are using there might be some differences with the

aforementioned general data.

2) Using the torque wrench, tighten the lock ring supplied

with the cassettes onto the freehub body (Pic. 8).

CAUTION!

Strictly follow the instructions provided by the cassette

manufacturer with regard to speciﬁc installation

techniques, the need for additional spacers and torque

speciﬁcations.

NOTE: please contact your dealer if you have questions or

are unable to install the cassette. The warranty does not

cover any damage to the bicycle and/or DIRETO XR-T in

the event of incorrect installation.

On bikes with 130-135 mm (5,1 -5,3 inch) chainstay

you must insert the right chainstay adapter (Ref. D) (Pic.

9) ) and the left adapter (E) (Pic. 10). However, on bikes

with ø12 mm (ø 0.47 inches) thru-axle and 142 mm (5,6

inches) chainstay please check paragraph 17.

16_INSTALLING THE BICYCLE ON DIRETO

XR-T

1) Loosen the rear bicycle brake if necessary.

2) place the chain on the smallest sprocket and chainring;

3) remove the rear wheel from the bicycle.

4) Insert the quick release and the chainstay adapter (Ref.

C) on the DIRETO XR-T (Pic. 11) sprocket set axle hole.

5) position the bicycle by inserting the chain on the smallest

sprocket (Pic 12).

6) fully insert the rear dropouts of the bicycle on the edge of

the DIRETO XR-T sprocket set axle (Pic.13), paying careful

attention to the correct internal or external position, based

on the type of bicycle:

- External triangle adapter (Ref. C) for road and time trial

bikes (130mm triangle) (Pic.14).

- Internal triangle adapter (C) for mountain bikes (135mm

triangle) (Pic. 15).

NOTE: the knurled side of the triangle adapter (Ref. C) must

be facing the bicycle dropout.

- Securely ﬁx the bicycle to DIRETO XR-T and ﬁrmly close

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elite Direto XR-T Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info