Bedienungsanleitung Elite Fuoripista (Seite 23 von 94) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

782484

Zoom out

Zoom in

Vorherige Seite

1/94

Nächste Seite

noiseless braking unit.

FUORIPISTA Bike is an electronic device used to conduct

workouts to be interfaced with a personal computer or

mobile devices (iOS and Android) or with cycle computers

with ANT+™ and/or Bluetooth Smart technology, but also

to workout on its own with no devices other than the built-

in screen.

FUORIPISTA Bike is compatible with most apps/software

such as: My E-Training, Zwift, TrainerRoad, The Sufferfest,

some Garmin Edge, RGT Cycling and many more.

My E-Training is an Elite-developed app compatible with

Windows and Mac computers (iOS and Android) that offers

many workout modes. Workouts are power or gradient-

based; there are videocourses, courses based on Google

Maps, you can import GPS data from your outdoor ride,

conduct evaluation tests and much more.

A "Stand-Alone" mode, which activates automatically

if FUORIPISTA Bike isn't connected to a device or

PC, is available, so interactivity is ensured under any

circumstance.

In this mode you can adjust the braking unit resistance

with the virtual gear shifter levers. Please check chapter

11_VIRTUAL GEAR SHIFTER for more info on the "Stand-

Alone" mode.

04_COMPONENTS LIST

Your FUORIPISTA Bike includes the following components:

1 Interactive stationary bike Ref. A

4 Feet Ref. B

Tablet terminal holder Ref. C

1 Handlebar tightening knob Ref. D

2 Side magnetic caps Ref. E

1 Power supply Ref. G

1 Seatpost adjustment wrench Ref. Q

1 Felt carrier Ref. W

05_FUORIPISTA BIKE ASSEMBLY

- Cut the plastic fixing bands (Pic. 1);

- remove FUORIPISTA Bike (Ref. A) from its supporting

pallet;

WARNING: handle with care as the FUORIPISTA Bike is

quite heavy (70 kg) and delicate (glass legs); please get at

least one other person to help you during this phase.

- select the area where to install FUORIPISTA Bike and

install its 4 feet (Ref. B) under the glass legs (Pic. 2)

- Rotate the handlebar (Ref. H) forward and slide it along

the rail, make sure that the interior rail is properly coupled

so the handlebar can be adjusted (Pics. 3-4-5-6).

- Assemble the handlebar tightening knob (Ref. D) and

make sure not to drop it on the glass flywheel (Pic. 7).

- Assemble the tablet terminal holder (Ref. C) by inserting it

in its proper front compartments (Pic. 8).

- Assemble the side magnetic caps (Ref. E) on the front

legs in correspondence of the edges of the flywheel shaft

(Pic. 9).

- Remove the lower cap (Ref. U) under the rear beam and

push the main switch (Ref. K) (Pic. 10). FUORIPISTA Bike

has been designed to always be powered up so you don't

need to operate the main switch in-between workouts.

- Put the lower cap (Ref. U) back.

06_ADJUSTMENTS AND CYCLING SETUP

FUORIPISTA Bike has been designed with a race bicycle

setup in mind; by adjusting the handlebar and saddle you

can cover frame sizes from small to XXL, so the user will be

able to adjust the setup according to his/her requirements.

07_HANDLEBAR ADJUSTMENT

You can adjust FUORIPISTA Bike handlebar vertically:

unscrew the front knob (Ref. D) by holding it with two hands

(Pic. 11) and rotating it three times - make sure not to

completely untighten it.

Move the bar-ends (Ref. H) to the desired position (Pic. 12).

Lock the knob in place by holding it with 2 hands (Pic. 13).

WARNING: Do not completely untighten the knob (Ref. D)

so it doesn't drop on the glass below.

08_SADDLE ADJUSTMENT

FUORIPISTA Bike saddle can be adjusted. To move it back,

forward or to tilt it, untighten the seatpost nut (Pic. 14) with

the 5 mm hex key (Ref. F), then adjust the position (Pic.

15) .

09_SEATPOST ADJUSTMENT

FUORIPISTA Bike seatpost (Ref. Y) height can be adjusted.

Get the proper wrench (Ref. Q)(Pic. 16).

Insert its edge in the pin hole as shown (Pic. 17)

Unscrew counter-clockwise by half a turn (Pic. 18)

Adjust the seatpost (Ref. Y) height (Pic. 19), pay attention

not to rotate the seat tube, just change its height and

tighten the nut back.

ATTENTION: A rotation of the tube can ruin the surface of

the seat tube.

Fix the pin by tightening it clockwise as much as you had

untightened it.

Put the adjustment wrench back in its slot.

10_EMERGENCY AND POWER BUTTON

There's a button (Ref. P) on the front of FUORIPISTA Bike,

right below the display (Pic. 20);

This button has 2 functions: power and emergency

brake. If it's in energy saving mode, the button powers up

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elite Fuoripista Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info