Bedienungsanleitung Elite Quick-Motion (Seite 15 von 54) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

782483

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

5) To unfold your Quick-Motion completely, grab the front

handles with both hands and give a strong push downwards

(Pic. 11 and Pic. 12).

! CAUTION !

If the bicycle being used has a wheelbase greater than

1044mm, before using the product, the hometrainer must

be opened gradually (until completely opened) to allow the

belts to stretch naturally.

6) Lock the unit by using the upper knob (Ref. B) (Pic. 13).

7) The Quick-Motion is now ready for training sessions!

!CAUTION!

For your own safety, set the hometrainer at 10-15mm (0.4

- 0.6 inches) forward of the central axis of the front whe-

el (Pic. 14). Should the front wheel be positioned too far

forward, it might fall out of the hometrainer.

- The incorrect positioning of the bicycle on the hometrai-

ner might damage the hometrainer.

06_FOLDING THE QUICK MOTION

1) For ease of transport or to just reduce clutter when not

in use, we suggest folding the frame (Pic. 10 and Pic. 9).

Unlock the system by using the upper knob (Ref. B) (Pic.

15). Grab the Quick-Motion by the side of the front edges

and fold the hometrainer (Pic. 16 and Pic. 17).

!CAUTION!

- Do not unscrew the knob completely!

- To avoid injuries when folding the hometrainer, be careful

of where your hands are placed.

- When transporting the hometrainer, the lower handle

must be tightened completely to avoid losing it (Ref. H).

Without the knob the wheelbase setting cannot be locked

in place.

- Set the safety knob (Ref. L) to the “O” locking position

(Pic. 18).

NOTE: The safety handle (Ref. L) only works when the whe-

elbase adjustment is set to the minimum distance.

2) The rollers work best with tyre that has a smooth tread.

If using a mountain bike, to reduce noise and increase sta-

bility change the tyre for one with a slick tread.

3) For beginners, position the rollers in an entrance hall,

in a doorway or near a stable object, in order to have a

support while acquiring the necessary balance.

4) Make sure the Quick-Motion rests on a ﬂat, stable sur-

face.

5) The oscillating system guarantees maximum functiona-

lity on a hard surface.

6) The Quick-Motion has 3 resistance levels: “1” minimum

resistance, “2” medium resistance, “3” maximum resistan-

ce (Fig.19). Select the required resistance level by shifting

the slide to the required resistance value. On acquiring gre-

ater skill on the rollers, you can also use the bicycle’s gears

to vary the resistance level.

7) Start pedalling and look ahead, like riding on the road.

Even if you would instinctively tend to look at the front whe-

el, you will keep better balance and pedal “in a straight

line” if you concentrate on an object located 2.5 – 4 m.

(10-15 feet) in front of you.

8) If you start leaning or shifting to one side of the rollers,

correct your position with light steering movements. If you

steer too much, you will lose balance or end up over the

side of the rollers.

9) Maintaining a high and even pedalling rate will

help you keep balance on the rollers, thanks to

the gyroscopic effect of the speed of the wheels.

10) At ﬁrst, pedalling on the rollers will give you the fee-

ling of instability, and moving the handlebar too abruptly or

pedalling at too strong a pace may make you lose control.

This is the big advantage of the rollers compared to the

standard training tools: the rollers will teach you reduce

movement of the upper part of your body and keep a smo-

oth pedalling motion.

11) After gaining conﬁdence with the Quick-Motion, you

can vary the resistance level by moving the resistance sli-

der to positions “2” (Fig. 16) or “3”.(Fig. 17).

12) Do not use the bicycle brakes to stop. Place a foot on

the Quick-Motion frame and allow the bicycle to come to

a halt.

13) Do not use the bicycle brakes to stop. Just place your

foot above the rear plate opposite the resistance cursor

(Ref. E) of the Quick-Motion until the bicycle comes to a

halt.

NOTE: to change wheelbase, unfold the roller and loosen

the transmission belt by pulling it out.

!CAUTION!

- Before each use, make sure the belts are properly placed

in their housings at edges of the rollers. Using the product

when the belts are not properly positioned might damage

both the belts and the hometrainer.

- When using the hometrainer for prolonged periods of

time with bigger bikes or with wheelbases greater than

1044mm, the correct transmission of the belt might not

be guaranteed if it’s later used with smaller bikes or with

wheelbases smaller than 1044mm. The installation of new

transmission belts may be required.

07_CARE AND MAINTENANCE

1) Prolonged exposure to direct sunlight can cause defor-

mation of the technopolymer rollers. Do not use or keep the

rollers in places where they are exposed to direct sunlight.

2) Always clean the rollers after use. Only use a damp

cloth. Do not use solvents or harsh detergents.

3) If the Quick-Motion is not going to be used for a prolon-

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elite Quick-Motion Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info