Bedienungsanleitung Elkron 80TC1L00133 (Seite 87 von 248) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

741458

Zoom out

Zoom in

Vorherige Seite

1/248

Nächste Seite

DS80TC1L-001 87

Advice for correct auto tracking use

General warnings

• The tracking function should mainly be used in indoor environments. Outdoor use is highly problematic: the

variety of objects (leafs, flags, litter, etc.) which may be moved by the wind makes use unreliable.

• Provide the best lighting possible in the detection zone: in poor lighting conditions, the inevitable presence of

noise on the image makes greyscale variations extremely critical. In poor lighting conditionsELKDome may

easily loose the tracked object..

• If IR illuminators are use, remember that:

o la ELKDome must be programmed to operate in B/W because the Slow Shutter will make tracking

unreliable in colour mode.

o the lighting entirely covers the frame where motion is tracked, possibly by restricting the range of

action of the ELKDome in Tracking mode.

• Avoid background objects in the frame which could trick the motion detector, such as for example Venetian

blinds, gates, doors with grid and objects with very marked, contrasting contours. A chequerboard background

is certainly the worst condition for satisfactory operation.

• Do not use the privacy zone function in frames where auto tracking is used: the privacy zone can trick the auto

tracking function.

• Do not use the auto tracking function if the object to be tracked and/or monitored moves too fast.

• Take into account the fact that, during day/night switching, tracking may be affected by the sudden change of

viewing from colour to B/W.

Similarly, in very poor lighting conditions, the presence of greater image noise may also affect tracking

reliability.

In both cases, the TARGET LOST SETUP option permits automatic restore of the correct operating conditions in

the case of loss of the target object.

Recommended control parameters

TARGET SIZE: select SMALL particularly in poor lighting conditions to improve performance.

SENSITIVITY: most false alarms are caused by the tracking of unexpected objects. For this reason, it is preferable to

select low sensitivity.

ZOOM SETTING: it is advisable to use the lowest possible zoom values. Excessive detail makes object tracking difficult

(the movement must be fastener and consequently the risk of loosing the object is much higher).

WAIT TIME: particularly, in the case of poor lighting conditions or frames with interference, it is preferable to set the

lowest possible time to prevent the ELKDome from constantly tracking unexpected objects (e.g. “video noise” in the

frame).

TRACKING SPEED: the AUTO setting should always be preferred, unless the object to be tracked does not always

move at low, constant speed.

BOUNDARY LIMIT: it is strong advised to delimit the tracking zone, avoiding to include unnecessary parts in the frame.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elkron 80TC1L00133 Seite 87

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info