Bedienungsanleitung Elkron IT500CLOUD (Seite 5 von 16) (Englisch, Französisch, Italienisch)

741400

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

IT500CLOUD 5

ENGLISH

GENERAL DESCRIPTION

WARNING: This document contains important information on the product for installing, configuring

and updating the software. For more detailed information, see the My Elkron Family App

installation manual, which can be downloaded from the www.elkron.com website.

WARNING! The IT500CLOUD interface is only compatible with the MP500/8 control panel with

versione1.10 or later.

The IT500CLOUD interface is an optional device, which can be used to remotely manage the

MP500/8 control panel using a mobile device and/or tablet via a modem router.

The device can be connected to the LAN network in two ways:

• WiFi

• Ethernet (cable)

Make sure you can connect to the Internet through the home network.

From a mobile device and/or tablet you can:

• Totally or partially arm the system.

• Totally or partially disarm the system.

• Receive notifications of any alarms.

• Check the status of the alarms and their details in real time.

• Check the status of operation of the system in real time.

• Read the contents of the control panel history.

• Exclude/Include any intrusion inputs.

• Activate/Deactivate any outputs programmed as commandable.

WARNING! Before proceeding with installation, configuration and

functional tests, a mobile device (Smartphone or Tablet) must be available

to install the dedicated App - My Elkron Family, available and

downloadable from the Play Store or App store.

In order to install and use the application you must have:

for Android devices, version 5.0 or higher / for IOS devices, version 10.0 or

higher.

The module can be installed in three different ways:

• Inside the MP500/8 control panel in a special location (see Fig. 3)

• Wall-mounted with screws and plugs (see Fig. 2) using the ABS box model CP/EP500.

• In a flush-mounting box

Place the device in a place:

• At a height not exceeding 2 metres from the floor.

• Not subject to excessive fluctuations in temperature.

• Protected by the burglar alarm system.

• Away from strong electromagnetic fields.

If you have chosen to connect the device to the home network via WiFi, check that there is

sufficient range.

If you have chosen to connect the device to the home network through a cable (Ethernet):

• In the case of using the box CP/EP500 with the aid of a special tool, (see Fig. 2 point 3)

make an opening on the cover for the passage of the Ethernet cable (connector).

• Prepare everything you need to connect the Ethernet cable to an appropriate connector of

the device (see Legend Fig. 1 - F)

If it is not located in the box CP/EP500, the tamper must be excluded by positioning the DIP4 in

the ON position (see Legend Fig. 1 - C).

My Elkron Family

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elkron IT500CLOUD Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info