Bedienungsanleitung Elkron MP110TG (Seite 9 von 20) (Englisch)

741485

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

(((ELKRON)))

MP110 USER MANUAL

(((ELKRON)))

MP110 USER MANUAL

4.Sensor EXCLUDED/Re-entry

1. Enter the Master user code and press the

key.

2. The first sensor available for EXCLUDED is proposed. The message

“INSULATION Z nn” appears on the display (where nn refers to the

number of the sensor, see the sensor table to know to which zone it

corresponds).

3. Use the

key to forward scroll the list of sensors..

Use the

key to backward scroll the list of sensors.

Use the

TOTAL

key to return to the beginning of list.

4. To EXCLUDED the sensor under consideration, press

The message “ZONE nn INSULAT” appears on the keypad screen.

If all the sensors are EXCLUDED, the message “ALL ZONES

INSULAT” will appear on the LCD display.

5. Press

EXIT

to exit the programming function.

1. Enter the Master user code and press the

key.

2. Re-entry of the first EXCLUDED sensor is proposed with the message

“SETTING ZONE nn” (where nn is the number of sensor, refer to the

sensor table to know to which zone it corresponds).

3. Use the

key to forward scroll the list of EXCLUDED sensors.

Use the

key to backward scroll the list of EXCLUDED sensors.

Use the

TOTAL

key to return to the beginning of the list.

4. To include the zone under examination, press

5. The message “ZONE nn SETTED” will appear on the keypad screen.

To select the next zone, press the

key. The message

“ALL ZONES SETTED” will appear on the display if there are no

EXCLUDED zones.

6. Press

EXIT

to exit the programming function.

4.1 Sensor EXCLUDED

4.2

Re-entry of Previously EXCLUDED Sensors

Electronic Key Programming

SYSTEM MANAGEMENT WITH

ELECTRONIC KEY

DK2000M

1.Commutator Description

ON = alarms stored, low battery,

absence of mains, system

failures, tampering

SLOW FLASHING =

during key programming and to

signal open inputs. In case of

concomitance of stored alarms,

failure, etc. with open inputs, the

led flashing will be fast.

ON = ZONE 1 ARMED

OFF = ZONE 1 DISARMED

ON = ZONE 2 ARMED

OFF = ZONE 2 DISARMED

ON = ZONE 3 ARMED

OFF = ZONE 3 DISARMED

Once your system has been installed, if management by electronic key

is foreseen, the unit must acquire the keys that you intend to use. We

recommend performing the first storage in the presence of the engineer.

Keys can be stored in three different ways:

- STORAGE OF A NEW KEY

For storing a key code in a new system or changing the code of all

keys in case one key is lost

- ADDING A KEY

For adding one or more keys to an existing system

KEY CODE DUPLICATION

For storing a key code in a second system by copying it from a

previously programmed key. With this function it is possible to check

one or more systems with a single key. For example, the home system

and the office system will both recognize the same key (without

needing to use 2 different keys).

CHECK OF STORED KEYS

For checking previously programmed keys, by verifying correctness

of code, the key number and the zones controlled.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elkron MP110TG Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Elkron MP110TG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info