(a)
(b)
(c)
A spare upper cutting blade is located in the
accessory box. Replace the blade when it
becomes dull or nicked.
1. Unplug the machine.
2. Remove needles.
3. Open both front and side covers.
4.
Remove the upper
cutting blade by loosening the bolt
(b) with the screwdriver (c) found in the
accessory box.
5. Brush the fixed cutting blade and the
surrounding area to clean out any
accumulation of lint, etc. Position the new
blade and tighten the bolt (b) firmly.
Set the upper cutting blade (a) in its down
(engaged) position.
Replacing the Upper Cutting Blade
68
NOTE:
The fixed cutting blade is made of a special
hard alloy and will not normally have to be
replaced.
1. Unplug the machine.
2. Loosen the screws and remove the light
bulb cover.
3. Unscrew the light bulb and replace it
with new 15 watt bulb.
Replacing the Light Bulb
4. Reattach the light bulb cover.
