614481
104
Zoom out
Zoom in
Vorherige Seite
1/116
Nächste Seite
102
Condition
Needle thread breaks
Bobbin thread breaks
Needle breaks
Skipped stitches
Designs are distorted
Machine does
not work
Abnormal noise when
machine is turned on
LCD Touch Screen
is not visible
Noisy operation
Selection keys
do not work
Cause
1.The needle is not threaded properly.
2.The needle thread tension is too tight.
3.The needle is bent or blunt.
4.The needle is not inserted correctly.
5.The needle thread and bobbin thread are not
set in the thread holder before sewing starts.
1.The bobbin thread is not threaded correctly in
the bobbin case.
2.Lint has collected in the bobbin case.
3.The bobbin is damaged and does not turn
smoothly.
1.The needle is not inserted correctly.
2.The needle is bent or blunt.
3.The needle clamp screw is loose.
4.The needle thread tension is too tight.
1.The needle is not inserted correctly.
2.The needle is bent or blunt.
3.The needle thread is not threaded properly.
4.The hoop is not attached correctly to the
carriage.
5.Fabric is not taut in the hoop.
6.Stabilizer is not being used.
1.Fabric is not taut in the hoop.
2.The hoop is not attached correctly to the
carriage.
3.The carriage is hitting into something around
the machine.
4.Fabric is caught or pulled by something
during sewing.
5.The needle thread tension is too tight.
6.Stabilizer is not being used.
7.The thread on the underside of fabric is not
cut correctly.
1.The machine is not plugged in.
2.A thread is caught in the hook area.
3.The control circuit is not working correctly.
1.Something is caught between the carriage
and arm.
2.The carriage is touching something around
the machine.
1.Screen contrast is not adjusted correctly.
2.Machine has not been used for a time and
enters eco mode.
1.Threads have been caught in the hook area.
2.Lint has built up in the bobbin case or hook
area.
1.Keys are not aligned correctly.
2.The control circuit is not working correctly.
TROUBLESHOOTING
See page (s)
36
12
42
42
40
34
96-98
Change bobbin
42
42
42
12
42
43
36
50
48
44
48
50
16
Free up fabric
12
44
Cut thread
14
96-98
Turn machine off and on
Remove object
16
22
22
96-98
96-98
24
Turn machine off and on
104

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Elna eXpressive 820 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info