704002
93
Zoom out
Zoom in
Vorherige Seite
1/96
Nächste Seite
89
Error Message Error Description Remedy
E : 00
Communication error with the RCS unit. Turn the power switch off and turn it on
again.
Initializing error. Turn the power switch off and turn it on
again.
Needle bar switching error. Turn the power switch off and turn it on
again.
Needle bar stop position error Press the ENTER button to reset the
machine.
Driving motor stops due to an overload. After 15 seconds, the LCD screen will
show the Ready to Sew mode display.
Remove jamming threads or other
cause of overloading.
Needle thread broke or ran out. Press the MODE button to return to the
Ready to Sew mode and re-thread the
needle.
Needle bar setting error. Press the MODE button to return to
the Ready to Sew mode, then turn the
power switch on and set the needle bar
number.
Auto thread cutting error. Turn the power switch off and turn it on
again.
Opening tension disks while stitching. Pull the tension release lever to close
the tension disks. The LCD screen will
show the Ready to Sew mode display.
Upper shaft stop position error. Turn the power switch off and turn it on
again.
Initializing error of the thread catcher
motor.
Press the ENTER button to initialize the
motor.
The embroidery area exceeds the hoop. Press the ENTER button.
Check the hoop type and the
embroidery area.
* If the error message appears repeatedly, contact the service center or the store from whom the machine was
purchased.
Audible signal The buzzer sounds when:
pip Normal operation
pip-pip-pip-pip Invalid operation or malfunction
pip-pip Thread color change
pip-peep pip-peep Embroidery completed
peep Malfunction
Audible Signals
Error Message
93

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Elna eXpressive 970 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Elna eXpressive 970

Elna eXpressive 970 Bedienungsanleitung - Deutsch - 96 seiten

Elna eXpressive 970 Bedienungsanleitung - Französisch - 96 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info