614473
12
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
10
w Reversestitchbutton
When stitches (01, 05, 06) are selected, the
machine will sew in reverse while the reverse stitch
button is pressed.
If you press the reverse stitch button when stitch
pattern 01, 05 or 06 is selected and the foot control
is not connected, the machine will sew in reverse as
long as the button is pressed, and the machine will
stop when the button is released.
If you press the reverse stitch button when sewing any
other stitches except (02, 18), the machine will
immediately sew locking stitches and automatically
stop.
e Auto-lockbutton
When stitches (01, 05, 06) are selected, the
machine will sew immediately sew locking stitches
and automatically stop when the auto-lock button is
pressed.
If you press the auto-lock button when sewing any
other stitches, the machine will sew locking stitches at
the end of the current pattern and automatically stop.
r Needleup/downbutton
Press this button to bring the needle up or down.
The machine will stop with the needle up or down
depending on the machine setting (see page 20).
t ThreadCutterButton
Press this button to trim the threads after sewing.
The thread cutter sign will blink y while the machine
cuts the threads.
You can continue sewing without pulling the bobbin
thread up after trimming the threads.
To trim the threads automatically after the sewing,
select the desired stitch pattern, then press and hold
the thread cutter button until the thread cutter sign
appears u.
The machine will automatically stop and trim the
threads after locking stitches when the reverse or
auto-lock button is pressed.
* To cancel the auto-thread cutting, press and hold
the thread cutter button until the thread cutter sign
disappears.
NOTE:
Use the thread cutter on the face cover if the thread
is #30 or thicker.
MachineOperatingButtons
q Start/Stopbutton
Lower the presser foot lifter.
Press the start/stop button q to start the machine.
The machine starts running slowly for the first few
stitches; it then runs at the speed set by the speed
control slider.
Press the start/stop button q again to stop the
machine.
NOTES:
•Themachinerunsslowlyaslongasyoupressand
hold the start/stop button q.
•Thestart/stopbuttonq cannot be used when the
foot control is connected to the machine.
q
w
e
r t
y
u
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

elna-lotus

Suche zurücksetzen

  • Gibt es die Bedienungsanleitung für die Elna Lotus auch in Deutsch Eingereicht am 23-9-2018 12:38

    Antworten Frage melden
  • gibt es die Bedienungsanleitung für Nähmaschine elna lotus (neu) auch in deutsch? Eingereicht am 15-9-2017 20:52

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Elna Lotus wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Elna Lotus

Elna Lotus Bedienungsanleitung - Deutsch, Englisch, Französisch - 100 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info