Bedienungsanleitung Elro AP5500 - Pro Alarm System (Seite 3 von 8) (Englisch)

708667

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Congratulations with your new ELRO PRO Alarm System AP5500, a secure and independently

working Alarm System!

This Short manual will help you through installation and Set-Up of your System effectively. If you have

further questions, ideas or recommendations, visit www.elro.eu

for a detailed manual, an FAQ section

and the possibility to leave us with your honest feedback on our products.

MULTIPLE USERS

The system allows up to 6 Users and one Master User. Each user will have a different Password.

Agree about the different Passwords:

Master:______User1:______User2:______User3:______User4:______User5:_______User6:______

How to start?:

Overview your home as a burglar! Which entrances do you think he will take? What is your main

entrance? Do you want to switch your alarm on and off with a remote, use the Alarm Panel, or use an

external Keypad (not included). What do you need to prevent and how? Do you want to switch on the

alarm only when you are away from home, or also when you are a sleep?

A: Door/window contact B: PIR motion sensor C: PIR motion sensor E: Remote Control

D: Door/window contact F: Alarm Panel

Divide the house in Alarm parts according figure:

It is possible to put the Alarm system in Partial armed (2 different parts) and full armed.

For example when we are at home we only Arm the Garage PARM1, but not the rest. If we are a sleep, we

only arm the Garage and down floors PARM2, but not the rest. If we are away from home Full armed.

We also can give a sensor being defined as an sensor with Exit/Entry Delay. For example; If we leave

home, and we want to switch on the alarm on the panel, we give the door/window magnet E: the Exit/Entry

delay status. All other sensors can have the immediate status. Your system can be divided in groups or

zones. When there is an alarm you can see which Zone gave alarm. The zone number also will be selected

on the sensor. All sensor in the same zone will have the same PARM and Exit/Entry delay statuses.

You can divide up to 6 zones. If you have not more than 6 zones you can give each sensor its own zone

number.

Draw a map of your home, mark the places to be secured, and make an overview on the last page like:

A: Door/window contact : Zone number: 01 PARM1:On PARM2: On Exit/Entry Delay: Off

B: PIR Motion Sensor : Zone number: 02 PARM1:Off PARM2: On Exit/Entry Delay: Off

C: PIR Motion Sensor : Zone number: 03 PARM1:Off PARM2: Off Exit/Entry Delay: Off

D: Door/window contact : Zone number: 04 PARM1:Off PARM2: On Exit/Entry Delay: On

E: Remote Control : advise to take this with you when you go to bed. Easy to control the alarm, and in

reach in case of panic!

F: Alarm Panel : can be installed hidden, for example behind the hood in the hall.

Telephone numbers: Consider which numbers must be called in case of alarm: fill in the numbers on the

overview on the last page.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elro AP5500 - Pro Alarm System Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Elro AP5500 - Pro Alarm System

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info