- 3 -
3. Installation Android
The camera installation must be carried out WITHOUT network cable.
After installation and if needed for a more stable connection, you can connect the camera with
a network cable to your router/modem
• Connect the adapter to the camera and a wall outlet, do not connect the network cable.
• Wait for about 1 minute for the camera to perform a self-test, the camera will start running.
• Open the app and tap "Add accessories" (1).
• Scan the QR Code on the bottom of the camera (2).
• Connect your smartphone to the camera's network, tap the blue bar (3).
• When prompted, enter the camera's default password: 01234567.
• The camera's network IPcam***870-TLUSN (4) will now be visible in the WiFi list, tap it
(Installation with Android tablet see page 5).
• Your smartphone is paired with the camera (5) (Installation with Android tablet see page 5).
• The camera is now not connected to the internet, only to your smartphone.
• Return to the WiFi list (6) (Installation with Android tablet see page 5).
• Choose your own network, refresh (7) if the network is not yet visible.
• Once your own network has been set up, press the blue "V" (8) to confirm.
• You can now give the camera a (location) name (9), click the blue "V" to agree.
• Now tap the Smart Camera icon (10).
• The camera will come online, tap the circle with the exclamation mark (11).
• You will now be asked to change the password "admin" (12).
• Change the password and confirm (13), the camera is now successfully connected (14).
ADVICE: In case of an unstable network, you can connect a network cable to the camera and
your router/modem after installation.
