Bedienungsanleitung Elro DV477W4 (Seite 4 von 4) (Englisch)

708972

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

-3- -4-

Installing Your Video Doorphone

A: Mounng the outdoor unit (surface mount)

1. Take the rainshade and use it to mark the drilling

holes on your wall. Make sure that you are able to

reach this place from the back with the 2x 4-wire

connecon cable (and the door lock cable if

applicable) to link it to the monitor. We recommend

a mounng height of between 1,35 and 1,70 meters.

Try to avoid direct sunlight or rain as much as

possible.

2. Put the 4-wire cable with the connector through the

rectangular hole in the rainshade and connect the

cable plug to the slot. If you want to use exisng

wires, make sure you have at least 16 x 0,5 mm and

ask a professional electrician for support.

3. Oponally you can connect an electric door lock.

To connect a door lock you always use

2 x 0.1 mm² cables. Refer to the wiring instrucons.

diagrams in the "Adding a Door Lock" secon.

4. Remove the aluminium alloy panel with the inbus

screw; take out the name plate paper, note your

name and put it back in. Then put it into the

rainshade with the top side ﬁrst and ﬁx it with 2

screws at the boom.

5. Unfasten the screw behind the camera lens and

manually move the camera into the desired posion

for the best view; then fasten the screw ﬁrmly.

6. Put the aluminium alloy panel back and ﬁx it with

the inbus screw through the hole in the rainshade.

B: Mounng the indoor monitor

7. Use the mounng bracket to mark the drilling holes

on your indoor wall and ﬁx it to the wall, so that the 4-

wire cable and the power cable (plus oponally an extra

wire for door/gate lock) can go through from the back.

8. Connect the 4 wire cable to the slots number 1-4:

- 1 Audio wire (brown)

- 2 Ground wire (green)

- 3 Video wire (black)

- 4 Power wire (blue)

The wires must be in the same order as in the outdoor unit (check wiring diagram in

the “Adding a door lock” secon for details)

9. Lastly insert the power cable and hang the monitor on the mounng bracket. Your

new Video Door Intercom is now ready for use. In case you want to use exisng

wiring, ensure you have at least 4 x 0,5 mm² and keep the maximum length of the

cables below 50 meters.

Funcons of the Indoor Monitor

When a visitor rings the bell, the chosen ringtone will sound and the picture will appear

automacally on the monitor. You can then talk to the visitor by brieﬂy pressing the TALK

buon of the monitor. By pressing the DOOR UNLOCK or the GATE UNLOCK buon, you

can unlock your door or gate. If you want to view the picture from the camera without

someone having rung the bell, you can press the LIVE VIEW buon to see the live picture

for approx. 40 seconds.

With the buons on the side of the monitor you can select your ringtone,

change the ring and talk volume and adjust the brightness and

color intensity of the screen, see page 2.

Door unlock Gate unlock Talk Live view

1,35 - 1,7m

VERSTELBAAR

55°

LENS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elro DV477W4 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Elro DV477W4

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info