Bedienungsanleitung Elro DVR154S (Seite 5 von 23) (Englisch)

621095

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

- 9 -

sure to setup the related configurations as described in Section 6.10 Network Setup.

 USB 2.0 disk drives, card reader, etc.

If the user wants to use USB2.0 peripheral device to retrieve important recorded images and/or audio, please connect it to the

USB port connector.

 I/R remote control

The user may use I/R remote control to control the digital video/audio recorder.

 PTZ Cameras

Connect the RS-485 connector to PTZ camera(s) via the appropriate cable. The system supports a variety of different PTZ

cameras, including Pelco D protocol Dome, SamSung SCC-641P, etc. But different PTZ cameras can coexist in a system only

if they support the same protocol. Please make sure to set the PTZ ID of the camera(s), and setup the camera (RS-422/485

(Section 6.9

) accordingly.

4. Main Screen And Basic Operations

The split-window screen, as shown above, is the main screen after system startup. There are two types of split-window screens,

including 1-Window and 4-Window. The system will remember the last one before normal shutdown (as described in Section 5.6)

of the system. In addition to the split windows, the system time is displayed on the lower-left corner, the system states on the

lower-right corner, and the rolling screen messages, if shown while certain event occurs, on the lower corner.

The system states, from right to left, are described as the followings:

(1) Normal recording percentage,

(

2) Alarm recording percentage,

(3) Mute state – speaker icon shown for unmute, not shown for mute,

) X2 state – X1, X2, or X4,

(5) Manual record ON/OFF – REC icon shown for ON,

(6) Backup state – Backup icon shown for backup,

(7) SEQ display ON/OFF or playback state – SEQ icon shown for SEQ display ON, other icons for different playback states.

4.1 Text Input (Please match with a remote control usage)

here are certain circumstances that the system requires the user to enter text, such as system login, camera title setup, and so on.

Please follow the steps below to enter text:

(1) Press ENTER to edit the highlighted option. The flashing cursor will be shown to indicate the editing point. Besides, a keypad

hint will be shown as below.

(

2) Press ◄► to move the cursor to the left/right.

(3) Press code in text editing mode to change text case. (If this entry can accept number only, pressing code will have no effects.)

Indicators on the screen show the current setting:

123 = Number only

abc = No capital letters

ABC = All capital letters

CODE = Internal code for the selected language, such as Chinese, Japanese, etc.

(4) Press a number key (1-9, 0) repeatedly until the character you want appears. (1 for 1 or space, 2 for 2, a/A, b/B, or c/C,

for 5, j/J, k/K, l/L, M

UTE for 6, m/M, n/N, o/O, the others as shown on the keypad hint) If internal CODE is selected, a

CODE line will be added (after the first code is entered) for each new code to be entered. Please check the internal code table

for the selected language. For 2-byte code, e.g. Chinese or Japanese, the code accepted is from 0000 - FFFF.

36%

- 10 -

(5) Press mark to bring up a list of punctuation marks and special characters. The highlighted character in the list shows the

selected one. Press ▲▼◄► to change the selection.

(6) If you make a mistake, press BS to remove the character to the left of the cursor, or press DEL to delete the character at the

current cursor position.

(7) In text editing mode, internal code box, and mark list, press ENTER to exit and save changes, press ESC to exit without

making changes.

4.2 Login And Logout

There are three password levels in the system, including Administrator (highest), Supervisor, and Operator (lowest). If the user

does not login the system, he/she will be treated as “Guest” and can only view live video display.

The system allows up to 18 user accounts. The administrator can set up the login name and password for each user. (Please refer to

Section 6.7

for Password Setup.)

The Operator can operate live video display, the Supervisor live video display, image playback and archive, and the Administrator

everything.

To login/logout the system, press MENU in split-window display

call up Menu display, and then press ENTER when the

highlighted option is Login/Logout to enter Login/Logout display as

shown.

In Login/Logout display, follow the Text Input method described in

Section 4.1 to enter the Login name and Password, press ▲▼ to

highlight and select Login option, and then press ENTER to login

the

system. If the user wants to logout the system, just press ▲▼ to

highlight and select Logout option, and then press ENTER. Press ESC to exit without making changes.

There is one factory-preset login name/password aa/11 at Administrator level. The user can use it to login the system for the first

time.

Should the user have forgotten all the administrator-level passwords, please contact the local dealer or installer to recover

from it.

.3 Basic Operations

The basic user’s operations after he/she has logged into the system are described below:

 Numeric

Press these buttons to switch to the full-window display for the camera.

 Alarm Reset

Press this button to cancel alarm activation, i.e. reset the alarm outputs and silence the buzzer.

 MODE (Administrator/Supervisor)

In split-window display, press this button to change circularly the live/playback mode for the focus window and the other

windows that form a rectangle on the screen.

 S

Press this button to switch to or return from SEQ display mode. In SEQ display mode, each page in the sequence will be

shown for the preset page dwelling time sequentially, and SEQ icon will be shown on the lower-right corner of the screen.

 SEARCH (Administrator/Supervisor)

In split-window display, press this button to display the search menus. The system will remember the last one the user chose.

 REC

Press this button to force manual recording. To stop manual recording, press it again. All cameras will be recorded as if the

scheduled record is A/V, and REC icon will be shown on the lower-right corner of the screen if manual recording is ON.

 MENU / ESC

In split-window display, press this button to display the versatile menu.

 Stop (

) / PTZ

In split-window display, press this button to enter PTZ control mode if the focus camera is a PTZ camera.

 X

In full screen display, press this button to enter Digital Zoom mode. Please refer to Section 4.4 Digital Zoom

for the detailed

operations in Digital Zoom mode.

 ▲▼◄►

Press these buttons to move focus. The title of the camera for the focus window is highlighted as shown on the screen.

Elro DVR154S Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Elro DVR154S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info