Bedienungsanleitung Elro HA68S (Seite 34 von 34) (Englisch)

536725

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

-33--32-

KEY TONE

This feature, if enabled, allows the Control Panel to be emitted a tone each time

the keypad is pressed.

Default setting: ON

Scroll through the menu until ‘2-10 Key Tone’ is displayed. The current setting

will also be displayed.

To change the setting press .

Press to enable Key Tone, or

Press to disable Key Tone.

GSM DIALER

This feature, if enabled, allows the Control Panel to be connected the GSM dialer.

Default setting: OFF

Scroll through the menu until ‘2-11 GSM Dialer’ is displayed. The current

setting will also be displayed

To change the setting press .

Press to enable GSM dialer, or

Press to disable GSM dialer.

DIAL MODE

This facility controls whether the internal telephone dialer operates with the

voice dialer facility or an external Remote Security Monitoring service.

Default setting: Voice Dialer

Scroll through the menu until ‘2-12 Dialer mode’ is displayed. The current

setting will also be displayed.

To change the setting press .

Scroll through available options, (Voice Dialer and Digital dialer) until the

required setting is displayed.

Press to save and exit, or

Press to exit without saving.

WIRELESS SIREN HOUSE CODE

Scroll through the menu until ‘2-13 Wirefree Siren’ is displayed and press .

Code Learning

The wireless siren has a row of 8 DIP switches. In order to communicate with

the Control Panel properly, the house code for the wireless siren needs to be

learned by the Control Panel.

Scroll through the menu until ‘1:Code setup’ is displayed and press . Press

the Control Panel’s keypad 1-8 by selecting 0 or 1 respectively in turn. (1 means

the dip switch is set in ON position, 0 is set in OFF position).

Press to save and exit, or

Press to exit without saving.

ENFORCEMENT FOR WIRELESS SIREN

Default setting: ON

Scroll through the menu until ‘2: Siren working’ is displayed. The current

setting will also be displayed.

To change the setting press .

Press to enable the Wireless Siren, or

Press to disable the Wireless Siren.

WIRELESS KEYPAD

This feature, if enabled, allows the Control Panel to be controlled wireless

keypad with ease.

Default setting: OFF

Scroll through the menu until ‘2-14 Wirefree Keypad’ is displayed. The current

setting will also be displayed and press .

Code Learning

Scroll through the menu until ‘:1 Learning ID’ is displayed.

Three possibilities would happen as follows:

Learning OK – the ID code was learned by the Control Panel successfully.

Time Out – the time involved for learning the ID code is 60s. During this

duration, fail to press the button on the remote control would result in

overdue programming.

ID Duplicate – the same ID code was learned by the Control Panel beforehand.

Scroll through the menu until is displayed and press .

Press to enable the Wireless Keypad, or

Press to disable the Wireless Keypad.

‘:2 Keypad1 Work’

ENEN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Elro HA68S Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Elro HA68S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info